Model Select(Mdl-Select); Model Name(Mdl-Name) - Ko Propo EX-1 ASF Instruction Manual

Model Select(MDL-Select)

Switch between different model memories.
Example
If you have multiple cars, it is convenient to have a separate
model memory for each one. Even in the case of only one
car, you could save specific settings for different courses
as different model memories as well.
Select the model to be used.
Setting Range MODEL:01 - 40
P All of the various settings are registered under a model memory.
The settings which will be switched by Model Select are...
P
1)Steering Setting
2)Throttle Setting
3)3CH Setting
4)4CH Setting
5)Steering and Throttle Response
6)Setup Functions (ET1-ET5, BT1 function assignments)
7)LED Color
8)Model Name
9)Stopwatch Settings
10)Countdown Timer Settings
Switching model memory while driving may cause setting
mismatches and lead to an uncontrollable model. Please place the
car on a stand or switch if off before switching model memories.
(Basic Operation p.13)

Model Name(MDL-Name)

This function is used to name the model memory that is
currently in use. Distinguish each model memory with
different names, which may also be edited. The set model
name will be displayed on the initial screen and model
select screen.
Choose one character at a time from the right side.
(Basic Operation p.13)
Setting Range Maximum 16 characters.
[Selectable Characters]
To delete a character, overwrite the character to be deleted by
P
using the blank space at the end of each page of characters.
16