Fuel Valve Removal And Installation - Suzuki ltz 400 Service Manual

1G-10 Fuel System:
• Full open the fuel valve screw (1) by turning the fuel
valve screw counter clockwise.
1
"a": Full open: 5.5 mm (0.2 in)
• Connect the breather hose and fuel vapor return hose
as shown in the oil return tank hose routing diagram
and throttle body construction. Refer to "Oil Return
Tank Hose Routing Diagram in Section 1B (Page 1B-
1)" and "Throttle Body Construction in Section 1D
(Page 1D-8)".

Fuel Valve Removal and Installation

Removal
WARNING
!
• Keep away from fire or spark.
• Spilled gasoline should be wiped off
immediately.
• Work in a well-ventilated area.
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation (Page 1G-9)".
2) Disconnect the fuel hose (1) and fuel feed hoses (2).
1
1
" a "
I933H1170016-03
B933H21706011
2
I933H1170035-04
3) Remove the fuel valve (3) and O-ring (4).
3
4) Remove the fuel filters (5).
Installation
Install the fuel valve in the reverse order of removal. Pay
attention to the following points:
• Install the new O-ring (1) and fuel valve (2) from the
fuel tank.
CAUTION
!
Replace the O-ring (1) with a new one.
2
1
4
I933H1170017-08
5
5
I933H1170040-01
I933H1170018-02