Suzuki ltz 400 Service Manual page 426

5B-16 Manual Transmission:
• Install the gearshift cam stopper (1), bolt (2), washer
(3) and return spring (4).
• Tighten the gearshift cam stopper bolt (2).
NOTE
Hook the return spring end to the gearshift
cam stopper (1) and crankcase.
2
1
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate (5).
NOTE
Align the gearshift cam pin "A" with the
gearshift cam stopper plate groove "B".
"B"
5
1
4
3
I933H1520064-01
I933H1520065-01
"A"
I933H1520066-01
• Tighten the gearshift cam stopper plate bolt to the
specified torque.
Tightening torque
Gearshift cam stopper plate bolt (b): 24 N·m (2.4
kgf-m, 17.5 lb-ft)
• Install each springs (6), pins (7) and pawls (8) into the
gearshift cam driven gear (9). The large shoulder "C"
must face to the outside.
• With the pawls (8) held in pushed position, install the
pawl lifter (10).
8
6
9
7
6
7
8
9
(b)
I933H1520067-01
"C"
8
9
I933H1520068-02
10
I933H1520069-01