Suzuki ltz 400 Service Manual page 482

9D-5 Exterior Parts:
2) Disconnect the ignition switch coupler (4).
3) Remove the screw (5).
5
4) Remove the reverse selection knob (6) and screw
(7).
6
5) Remove the screws (8).
8
6) Remove the front fender (9) by removing the
fasteners (10).
4
I933H1940004-02
7
I933H1940005-01
8
I933H1940006-01
10
9
I933H1940007-01
7) Remove the front fender bracket (11), left and right.
Installation
Install the side cover and front fender in the reverse
order of removal. Pay attention to the following point:
Apply thread lock to the front fender mounting screws
and tighten them to the specified torque.
: Thread lock cement 99000–32110 (THREAD
LOCK CEMENT SUPER 1322 or equivalent)
Tightening torque
Front fender mounting screw (a): 12 N·m (1.2 kgf-
m, 8.5 lb-ft)
(a)
11
I933H1940010-01
(a)
I933H1940022-03
I933H1940008-07