Creating The Supervisor Configuration File - Comelit simplehome Technical Manual

5. Select the wired / radio zones and the status to be linked with the scenario.
In the case of the scenario that has just been created:
» The name of the scenario appearing in the list of conditioned scenarios on the Planux Manager / Minitouch monitor will be "Alarm
Scenario".
» It will be activated if both "Entrance Door" and "Sitting Room Window" are open for 60 seconds.

3.5.13 - CREATING THE SUPERVISOR CONFIGURATION FILE

Once all parameters have been set for the system, the confi guration fi le for the Planux Manager monitor must be created.
1. On the Supervisor tab, press Save and Send.
» The text "Save successfully completed!" will appear.
2. Press OK.
94