Comelit simplehome Technical Manual page 28

Term. Function
- BUS power supply negative
+ BUS power supply +24 Vdc
D BUS data line
K Common
V- Support negative
V+ +24 Vdc support
I8 Input 8
I7 Input 7
I6 Input 6
I5 Input 5
I4 Input 4
I3 Input 3
I2 Input 2
N.B. The module must be programmed via the BUS line, using the SimpleHome/RS232 interface (20022611) and the SimpleProg
programming software.
Specifi cations are subject to change without notice.
28
DIGITAL MODULE
Term. Function
I1 Input 1
IS Multiple command (scenario)
NO1 Output 1 – NO contact
C1 Output 1 – Common
NC1 Output 1 – NC contact
NO2 Output 2 – NO contact
C2 Output 2 – Common
NC2 Output 2 – NC contact
NO3 Output 3 – NO contact
C3 Output 3 – Common
NC3 Output 3 – NC contact
NO4 Output 4 – NO contact
C4 Output 4 – Common
green (bus)
red (+)
blue (-)
Term.
NC4
NO5
C5
NC5
NO6
C6
NC6
NO7
C7
NC7
NO8
C8
NC8
Function
Output 4 – NC contact
Output 5 – NO contact
Output 5 – Common
Output 5 – NC contact
Output 6 – NO contact
Output 6 – Common
Output 6 – NC contact
Output 7 – NO contact
Output 7 – Common
Output 7 – NC contact
Output 8 – NO contact
Output 8 – Common
Output 8 – NC contact