Comelit simplehome Technical Manual page 54

Once the module you wish to query has been selected and the test begun, the selected device model and the instant-by-instant status (active /
inactive) of the inputs and available outputs appear at the top of the window.
54
DIGITAL AND ANALOGUE MODULE TEST
While the system is running and communicating with the PC via the SIMPLEHOME/RS232 connection
interface, click on the command to make the following window appear:
AVAILABLE COMMANDS
Select the serial number of the module you wish to test
Select the previous or next module
Start query and test for the selected module
End test for the selected module
Exit the "MODULE TEST" function and return to the main screen