Table Of Contents - Comelit simplehome Technical Manual

TABLE OF CONTENTS

1 INTRODUCTION
1.1 SIMPLEHOME: DISTRIBUTED INTELLIGENCE
AND PROPRIETARY PROTOCOL
1.2 SIMPLEHOME: MULTIFUNCTIONAL MODULES,
DISTRIBUTED POWER SUPPLY
1.3 COMMUNICATION TYPE
1.4 DIGITAL AND ANALOGUE MODULES
1.5 MODULE IDENTIFICATION
1.6 DIGITAL AND ANALOGUE INPUT
OPERATING PRINCIPLE
1.7 DIGITAL AND ANALOGUE OUTPUT
OPERATING PRINCIPLE
1.8 SUPERVISORS
2 DEVICES
2.1 ART. 20022101 - SWITCHING POWER SUPPLY UNIT
FOR SIMPLEHOME SYSTEM,
24 Vdc 2A ON DIN RAIL
2.2 ART. 20046501 - SIMPLEHOME MODULE
WITH 5 INPUTS, FLUSH-MOUNTED (5I)
2.3 ART. 20046502 - SIMPLEHOME MODULE WITH 5 DIGITAL
INPUTS AND 4 TRANSISTOR OUTPUTS,
FLUSH-MOUNTED (5I4O)
2.4 ART. 20046912 - SIMPLEHOME FLUSH-MOUNTED
INTERFACE MODULE WITH 2 RELAYS (RL2)
2.5 ART. 20046707 - SIMPLEHOME FLUSH-MOUNTED
MODULE WITH 2x 0-10 V ANALOGUE INPUTS (2I)
2.6 ART. 20046708 - SIMPLEHOME TEMPERATURE
SENSOR MODULE WITH 0-10 V OUTPUT, FLUSH-
MOUNTED (TEMP)
2.7 ART. 20046709 - SIMPLEHOME FLUSH-MOUNTED
LCD THERMOSTAT MODULE
2.8 ART. 20046604 - SIMPLEHOME MODULE
WITH 5 OPTICALLY COUPLED INPUTS AND 4
x 16A RELAY OUTPUTS ON DIN RAIL (5I4O16A)
2.9 ART. 20046605 - SIMPLEHOME MODULE WITH 9
OPTICALLY COUPLED INPUTS AND 8 x 6A RELAY
OUTPUTS ON DIN RAIL (9I8O6A)
2.10 ART. 20046606 - SIMPLEHOME MODULE WITH 9
OPTICALLY COUPLED INPUTS AND 8 x 6A RELAY
OUTPUTS ON DIN RAIL (9I8O16A)
2.11 ART. 20046810 - SIMPLEHOME MODULE WITH 2
ANALOGUE INPUTS AND 2 ANALOGUE
OUTPUTS ON DIN RAIL (2I2O)
2.12 ART. 20046821 - LOAD MANAGEMENT MODULE
2.13 ART. 20022611 - SIMPLEHOME/RS232
INTERFACE
2.14 ART. 20004100 - TEMPERATURE SENSOR
2.15 ART. 20004601 - MODULE WITH 3 INPUTS AND 3
OUTPUTS (3I3O)
2.16 ART. 20004602 - MODULE WITH 1 OUTPUT
p 4 2.17 ART. 20004603 - MODULE WITH 2 RELAYS
.
2.18 ART. 20004604 - MODULE WITH PULSE METER
p. 4
2.19 ART. 20003001 - MINITOUCH TIMER-
THERMOSTAT
p. 4
2.20 PLANUX MANAGER MONITOR ART.
20034801W/B + PLANUX MANAGER BRACKET
p. 6
ART. 6214C
p. 6
2.21 MINITOUCH MONITOR ART. 20034607
p. 6
2.22 SERIAL BRIDGE ART. 20090334
p. 7
2.23 DALI/DMX module Art. 20004600
p. 7
3 SIMPLEPROG, THE SIMPLEHOME
SYSTEM CONFIGURATION
SOFTWARE
p. 8
p. 9
3.1 ENTERING A USERNAME AND PASSWORD
p. 9
3.2 THE MAIN SCREEN
3.3 TREE MENU SCREEN AND
PROGRAMMING
p. 11
3.4 MODULE PROGRAMMING
p. 12
3.5.1 ADDING A PLANUX MANAGER / MINITOUCH
MODULE
3.5.2 ADDING / REMOVING SIMPLEBUS MODULES
p. 14
3.5.3 ADDING / REMOVING A PLANUX MANAGER OR
MINITOUCH
p. 16
3.5.4 CONFIGURING A MINITOUCH THERMOSTAT
p. 18
3.5.5 ADDING / REMOVING HOME AUTOMATION
ROOMS
3.5.6 ADDING / REMOVING ALARM AREAS
p. 19
3.5.7 ADDING / REMOVING ALARM ZONES
p. 23
3.5.8 RENAMING ALARM AREAS / ZONES
3.5.9 MANAGING SYSTEM MODULES
p. 25
3.5.10 CREATING A CONDITIONED OUTPUT
3.5.11 CREATING A CONDITIONED SCENARIO
p. 27
3.5.12 CREATING AN ALARM SCENARIO
3.5.13 CREATING THE SUPERVISOR CONFIGURATION
FILE
p. 29
3.6 ADDING A ONE - ONE/E MODULE
3.6.1 GENERAL ONE - ONE/E MODULE PARAMETERS
p. 31
3.6.2 CUSTOMISING THE ONE - ONE/E MODULE
p. 33
3.6.3 CONFIGURING ONE MODULE SCREENS
p. 34
3.6.4 CONFIGURING ONE/E MODULE SCREENS
p. 36
p. 37
p. 38
p. 39
p. 40
p. 42
p. 44
p. 46
p. 48
p. 50
p. 50
p. 51
MODULE p. 60
p. 64
p. 79
p. 80
p. 81
p. 82
p. 84
p. 85
p. 86
p. 88
p. 89
p. 91
p. 92
p. 92
p. 94
p. 97
p. 98
p. 99
p. 100
p. 105
3