Adjustment Test With Internal Weight - KERN ABT series Operating Instruction

8.4.2 Adjustment test with internal weight

During adjustment tests the balance automatically compares the saved value of the
adjustment weight with the actual value. This is only a check, i.e. no values are
changed.
Repeatedly press the [CAL] key until "FUnC.SEL" appears.
Press the [TARE] key. "CAL" is displayed.
Press the [TARE] key. "E CAL" is displayed.
Repeatedly press the [CAL] key until "i tESt" appears.
Press the [TARE] key. The display changes automatically in this
order: "tESt 2", "tESt 1", "tESt 0"
After this, the difference to the previous adjustment will be dis-
played for several seconds.
After "tESt End" was displayed, the balance will automatically
return to weighing mode.
28 ABT-BA-e-1312