User Settings - KERN ABT series Operating Instruction

15.5 User Settings

The user setting allows individual setting for each item in communication settings.
Repeatedly press the [CAL] key until "intFACE" appears.
Press [TARE] key
Repeatedly press the [CAL] key until "iF:USEr" appears.
Press [TARE] key
(Example)
Use the [CAL] key to select between the following settings
(The **** reflect the current setting, two to four characters):
"io.b:****" Speed of communication
"io.d:****" Delimiter
"io.P:****" Parity
"io.S:****" Stop bit
"io.F:****" Data format
"io.H:****" handshake
Confirm your selection by pressing the [TARE] key and set the
parameters you require as follows:
ABT-BA-e-1312 67