Setting The Date Printout; Printout Date And Time, Without Weight Value - KERN ABT series Operating Instruction

10.3 Setting the date printout

This setting determines whether or not the date and time on the balance's built-in
clock is printed out along with the log.
Press the [CAL] key repeatedly until "SettinG" appears.
Press the [TARE] key. The display shows "CAL dEF".
Repeatedly actuate the [CAL] key until "Prtdt:∗∗" appears (The ∗∗
symbolise the current setting).
To change settings, actuate the [TARE] key when "Prtdt:∗∗" ap-
pears.
You can use the [CAL] key to select between the following set-
tings:

"Prtdt-on"
"Prtdt-oF"
The current setting is indicated by the standstill display ( ).
Confirm your selection by pressing the [TARE] key
Actuate the [ON/OFF] key repeatedly. Return to menu/weighing
mode.

10.3.1 Printout Date and Time, without weight value

To print out only date and time, without weight value,
press [PRINT] button for approx. 3 sec.
ABT-BA-e-1312
Date and time are printed.
Date and time are not printed.
33