Percent Determination - KERN ABT series Operating Instruction

Remove reference weight.
Now you can fill the items to be counted into the container.
The respective quantity is shown in the display.
Repeated pressing of the [UNIT] key changes the display value,
e. g.: [g] → [%] → [Pcs] → [ct]
Note:
Error message "Err 20" indicates that the weight for the reference piece number is
too low.

14.2 Percent determination

Percent weighing allows to display weight in percent, in relation to a reference
weight. The displayed weighing value is stored as a standard percent value
(default setting: 100%).
Condition: Function "U- %" is activated (ch. 11.3)
Repeatedly press the [UNIT] key until the display is in percent-
age determination mode. The display symbol % pops up.
(When PCS is used for the
first time)
If you are using a weighing container use the [TARE] key for
taring.
Put on reference weight (=100%)
(minimum weight: Readability d x 100)
When standstill control ( ) is complete, press the [CAL] key.
The reference weight is saved.
Remove reference weight.
From now on the placed weight will be shown as %.
Repeated pressing of the [UNIT] key changes the display value,
e. g.: [g] → [%] → [Pcs] → [ct]
ABT-BA-e-1312 55