Balance Id Number Setting - KERN ABT series Operating Instruction

10.2 Balance ID Number Setting

This setting is for the balance ID number that is output along with the adjustment re-
port.
Press the [CAL] key repeatedly until "SettinG" appears.
Press the [TARE] key. The display shows "CAL dEF".
Repeatedly actuate the [CAL] key until "id:****" appears (The ∗∗
symbolise the current setting).
Press the [TARE] key. In the upper part of the display panel, the
ical input status. The leftmost digit of ∗∗∗∗ blinks. The numeral of
the blinking digit can be changed.
When the [UNIT] key is pressed, the numerical of the blinking digit
increases by 1 at a time. You can determine the value of the flash-
ing digit, or shift the flashing digit by one position to the right, by
pressing the [PRINT] key. Confirm your setting by pressing the
[TARE] key.
Actuate the [ON/OFF] key repeatedly. Return to menu/weighing
mode.
32
symbol and the # symbol appear in order to indicate numer-
ABT-BA-e-1312