Setting Date - KERN ABT series Operating Instruction

13.4 Setting date

Press the [CAL] key repeatedly until "SettinG" appears.
Press the [TARE] key.
Repeatedly press the [CAL] key until "d-MM.DD" appears (MM
and DD provide two digits each, indicating month and day).
Press the [TARE] key. The date currently set appears. In the up-
per part of the display panel, the
(
15. march 2003)
appear in order to indicate numerical input status. The leftmost
digit blinks.
When the [UNIT] key is pressed, the numerical of the blinking digit
increases by 1 at a time. You can determine the value of the flash-
ing digit, or shift the flashing digit by one position to the right, by
(
2. nov. 2004)
pressing the [PRINT] key. Confirm your setting by pressing the
[TARE] key.
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.
ABT-BA-e-1312
symbol and the # symbol
51