Setting The Time For Clock-Cal - KERN ABT series Operating Instruction

8.2.1 Setting the time for Clock-CAL

Press the [CAL] key repeatedly until "SettinG" appears.
Press the [TARE] key. The display shows "CAL dEF".
Press
(for setting 1)
Actuate the [TARE] key until "t*HH:MM" is displayed. The *-
position symbolises a number between 1 and 3 (3 set times for
automatic adjustment). The currently set time is displayed in
"HH:MM" (HH for hours, MM for minutes) format with the first digit
on the left flashing. The time appears as "_ _:_ _" when no time is
set. The
the numerical input
Pressing the [PRINT] key moves the blinking digit to the next digit
to the right. Press the [UNIT] key to change the value of the blink-
ing digit. When the [UNIT] key is pressed, the numerical of the
blinking digit increases by 1 at a time. The numerals progress in
this order: 0→1→2→...→9→_→0... Set the hours within the range
of 00 to 23 and the minutes within the range of 00 to 59. Complete
your setting by pressing the [TARE] key. The display returns to "t
CAL t*".
order to set another time, press the [CAL] key to move to the
In
next "t CAL t*" setting and set the time in the same way.
Actuate the [ON/OFF] key repeatedly. Return to menu/weighing
mode.
Clearing the Settings
The clock settings "tCAL t1" to "tCAL t3" may each be reset by
using procedure 3 to set the time setting to "_ _:_ _".
PSC and Clock-CAL may be turned on and off separately. The setting control display (see ch. 12.6)
shows the weight symbol (
ABT-BA-e-1312
the [CAL] key repeatedly until "tCAL t*" appears:
symbol, and the # symbol appear to indicate it is in
status.
), when PSC or Clock-CAL or both functions are activated.
23