Release Of Supervision; Windows - Siemens Synco living Operating Instructions Manual

Main menu > Supervision > Volume supervis dly:
Factory setting
Your setting
Setting 0% deactivates the signal sound / beep during supervision delay .

Release of supervision

Indicate in the central apartment unit the doors and windows that are to be
"partly monitored" or "all monitored".
These two functions provide for two different types of supervision, e.g. for
short absences when you want to keep open some windows for ventilation
and thus exclude them from supervision. And for longer absences (e.g. vaca-
tion) when you want to supervise all windows and doors.

Windows

The option list contains all rooms. Select the rooms with windows to be super-
vised. If a supervised window is opened, the message "Window open" ap-
pears. In addition, the buzzer, the status output, and a switching group func-
tion can be activated.
The "Window open" fault message remains active until supervision is
changed, even after all supervised windows are closed.
Main menu > Supervision > Windows > Rel "Partly monit":
Main menu > Supervision > Windows > Rel "All monit":
Supervision type
Factory setting
Setting
66 / 100
Siemens
Building Technologies
15%
Partly monitored
--- (no room)
Room 1
Room 2
Room 3
Room 4
Room 5
Room 6
Room 7
Room 8
Room 9
Room 10
Room 11
Room 12
Synco™ living Operating instructions
Central apartment unit QAX910
All monitored
--- (no room)
Room 1
Room 2
Room 3
Room 4
Room 5
Room 6
Room 7
Room 8
Room 9
Room 10
Room 11
Room 12
CE1B2707en
23.08.2008