Access Levels; User Level; Service Level; Expert Level - Siemens Synco living Operating Instructions Manual

Access levels

User level

The user level shows the settings most frequently used. Normally, these
settings are sufficient for operating the plant.

Service level

This operating level contains extended settings that are only rarely used. For
changing to the service level, a password is required, if such a password has
been assigned (refer to page 75). Confirm entry of your password with the
Menu / ok button.

Expert level

The settings of the expert level can only be accessed after entry of a pass-
word. For a description of the functions, refer to document "Mounting and
Commissioning" (CE1C2707en).
If no button is pressed on the expert level for a certain period of time,
the central apartment unit will automatically return to the user level.
Keep the passwords of the service and expert level in a safe place
where you can easily find them again.
Should you lose the service password, you need to contact the ex-
pert.
Loss of the expert password necessitates a new configuration of the
central apartment unit, or a service visit!

Settings

The settings described below are to be made only after the Synco™
living system has been commissioned by the expert.
The operating lines actually displayed are dependent on the plant's
basic configuration. Operating lines that are not required for the con-
figured plant is hidden.
If, with a selected parameter, the Info button is pressed, the path and
full text of the respective parameter will appear.
26 / 100
Siemens
Building Technologies
To select the access level, press the Esc button and
the Menu / ok button simultaneously. A pop-up
window appears. Press the Arrow buttons to select
the required access level and confirm the selection
with the Menu / ok button.
Synco™ living Operating instructions
Central apartment unit QAX910
CE1B2707en
23.08.2008