Stage Assignment For Smoke; Stage Assignment For Ventilation Contact; Switching Times - Siemens Synco living Operating Instructions Manual

Stage assignment for smoke

Specify the stage for ventilation when the central apartment unit detects
smoke.
Main menu > Ventilation > Stage setpoints > Smoke:
Factory setting
Setting

Stage assignment for ventilation contact

Specify the stage for ventilation when the ventilation contact is closed.
Main menu > Ventilation > Stage setpoints > Ventilation contact:
Factory setting
Setting
Ventilation time switch

Switching times

The central apartment unit controls the ventilation stages based on a ventila-
tion time switch for automatic ventilation operation mode (stage selection:
Auto).
Main menu > Ventilation> Ventilation time switch > ...
Up to six switching points can be set for each weekday and one special day.
In addition, you can specify the ventilation operating mode (Comfort, Precom-
fort, Economy) the system should change over for each switching point.
The switching points can be created, deleted, changed, or copied to another
weekday. The setting is carried out based on the room time switch (see
page 37).
The factory setting contains the switching times for all weekdays at
06:00 (changeover to Comfort) and 22:00 (changeover to Economy).
48 / 100
Siemens
Building Technologies
Off
Off
Stage 1
Stage 2
Stage 3
Off
Off
Stage 1
Stage 2
Stage 3
Synco™ living Operating instructions
Central apartment unit QAX910
CE1B2707en
23.08.2008