Possible Displays - Siemens Synco living Operating Instructions Manual

Possible displays

Status display of battery: If the batteries' capacity is suffi-
cient, the symbol is briefly displayed when pressing the
function button.
Status display of battery: If the batteries' capacity drops
below a certain level, the symbol is constantly displayed,
independent of the unit's operating state.
Summer operation active
Room timer function active
Display of automatic mode. Current operating level in
accordance with the central apartment unit's time program
Display of manual mode. Current operating level in accor-
dance with the settings made on the room unit
Control to the Comfort setpoint
Control to the Precomfort setpoint
Control to the Economy setpoint
Control to the Protection setpoint
Overriding by the central apartment unit: Apartment oper-
ating mode different from "AUTO" (e.g. due to active holi-
day program, absence, active apartment timer, or summer
operation)
Binding test, communication error, binding
Device fault: Sensor with short-circuit or open-circuit,
communication error
Room setpoint limitation active (refer to page 40)
Updating the room operating mode. Hourglass is displayed
when transmitting / querying the current / resulting room
operating mode.
°C
Unit of room temperature
Readjustment bar indicates an active room temperature
setpoint readjustment.
Siemens
Building Technologies
Synco™ living Operating instructions
Room unit QAW910
83 / 100
CE1B2707en
23.08.2008