Open Fireplace Mode; Ventilation Contacts; Service Interval; Operating Hours Since Maintenance - Siemens Synco living Operating Instructions Manual

Open fireplace mode

Shows if ventilation was switched via external contact to open fireplace opera-
tion (Off, On).
Main menu > Ventilation > Ventilation state > Fireplace mode:

Ventilation contacts

Shows the current state of the two ventilation contacts (Off, On).
Main menu > Ventilation > Ventilation state > Ventilation contact1:
Main menu > Ventilation > Ventilation state > Ventilation contact2:
Service

Service interval

Specify after how many hours (0..99,999) ventilation needs service (e.g.
change air filter). The central apartment unit shows a corresponding message
when the set number of hours is reached.
Setting 0 h means that the service interval and the associated mes-
sage are disabled.
Main menu > Ventilation > Service > Service interval:
Factory setting
Setting

Operating hours since maintenance

Shows the number of ventilation operating hours since last maintenance.
The operating hours must be reset to 0 to delete the service message.
The operating hours since service can be set to 0 or any value.
Main menu > Ventilation > Service > O'hrs since service:
50 / 100
Siemens
Building Technologies
0 h
Synco™ living Operating instructions
Central apartment unit QAX910
CE1B2707en
23.08.2008