Central Apartment Unit Qax910; Operating Elements - Siemens Synco living Operating Instructions Manual

Central apartment unit QAX910

Operating elements

All operating elements are located on the front of the unit.
The buttons provide the following functions:
DHW button, ventilation button
The button is used to operate DHW and ventilation.
For selecting the DHW operating mode (Auto / Normal / Reduced /
Protection), and for manually triggering one-time forced charging of
the DHW storage tank (extended pressure on button).
To set the ventilation stage (Auto, Off, Stage 1, 2, 3) and to trigger
forced ventilation (extended pressure on button).
Absence / Supervision button
The Absence / Supervision button allows you to set absence (pre-
sent / absent) and the supervision type (inactive / partly monitored /
all monitored). For details, see pages 27 and 27 (Absence, supervi-
sion).
Apartment timer button
For selecting and activating the timer function for specific rooms.
During the periods of time the timer function is active, the rooms are
heated or cooled to the Comfort setpoint, and ventilation is controlled
on the Comfort setpoint.
Mode button
For selecting the mode for the apartment (Auto / Comfort / Precom-
fort / Economy / Protection). The apartment mode applies to room
control and ventilation.
Info button
For scrolling through the info pages, and for calling up Help text on
the menu level.
18 / 100
Siemens
Building Technologies
Synco™ living Operating instructions
Central apartment unit QAX910
CE1B2707en
23.08.2008