Apartment; Apartment Timer Function; Apartment Operating Mode - Siemens Synco living Operating Instructions Manual

During the set supervision delay, you can close the corresponding doors and
windows.
After all supervised windows are closed, the constant signal sound turns into a
beep whose interval doubles during the last 15 seconds of the set supervision
delay.
If a supervised window or door is opened during the supervision period, an
associated fault message is triggered and other predefined actions are initi-
ated (with an adjustable message delay for doors).
Fault messages due to open doors/windows are deactivated by adjust-
ing the supervision type (Inactive / Partly monitored / All monitored).
This also interrupts triggered, predefined actions.
Detailed descriptions:
Trigger a switching group via an event page 60.
Set the supervision delay page 65.
Event buzzer and status output page 68.
Setting the supervision release page 66.

Apartment

Apartment timer function

By pressing the Apartment timer button (
cooling and ventilation to maintain operating mode Comfort for an adjustable
period of time. When pressing the button, the apartment timer window opens.
Use the Arrow buttons or the Apartment timer button to set the required
period of time for Comfort mode.
For each room you can select whether the apartment timer function
should be performed (refer to "Apartment timer influence" on page 40).
The apartment timer function can also be selected via the following operating
line:
Main menu > Apartment > Apartment operating mode > Apartment timer:
If you want to switch off the apartment timer before the adjusted period of time
has elapsed, press again the Apartment timer button and set the time to
"00.00".
In the case of a manual change of operating mode via the Mode button, the
apartment timer function will also be deactivated.

Apartment operating mode

When pressing the Mode button, an additional window appears (Mode pop-
up). Now, you can select the required apartment operating mode (heating,
cooling, ventilation) with the Arrow buttons or the Mode button.
28 / 100
Siemens
Building Technologies
), you can force the heating /
Synco™ living Operating instructions
Central apartment unit QAX910
CE1B2707en
23.08.2008