Holidays And Absence Simultaneously - Siemens Synco living Operating Instructions Manual

Every entry can be deleted.
Main menu > Holidays/special days > Calendar > Entry X:
During holiday periods, the selected apartment operating mode and the holi-
day DHW operating mode apply.
For a description of the apartment operating mode settings required
and the DHW operating mode during holidays, refer to page 70.
During special days, the special day time program of the respective rooms
and of DHW is used.
The special days with room, ventilation and DHW time switches can
be used for programming public holidays that fall on working days
(Mo – Fr), for example.
For such days, you probably wish to use a temperature profile similar
to Sundays.
With the special day of the switching group time switches, it is possi-
ble to determine which functions should be triggered during special
days and holidays.
Main menu > Rooms > Room X > Room time switch > Special day:
Main menu > DHW >Time switch > Special day:
Main menu > Ventilation > Ventilation time switch > Special day:
Main menu > Switching groups > Switching group X > Time switch
> Special day:
If the supervisory functions, presence simulation, etc., should be avail-
able during the holiday period / special days, the absence function
must also be activated (refer to the following section).

Holidays and absence simultaneously

The holiday program acts on the room, ventilation and the DHW operating
mode. Also press the Absence button if, in addition to the holiday program,
you want to take advantage of the absence functions (presence simulation,
supervisory function, etc.).
When the holiday and absence functions are simultaneously active,
the central apartment unit controls room temperature, ventilation and
DHW heating in accordance with the holiday operating mode.
At the end of the holiday period / special day, room, ventilation and DHW
operating mode will switch from "Holidays" to "Absence".
This means that on return from holidays, the absence function must be deacti-
vated again by pressing the Absence button.
During absence, ensure that the temperature level is not too low ("Pre-
comfort" or "no impact") to make certain that on completion of the
absence period the Comfort setpoint is quickly reached again. Slow
heating systems (e.g. underfloor heating systems) require more time
until the desired room temperature is reached.
Siemens
Building Technologies
Synco™ living Operating instructions
Central apartment unit QAX910
69 / 100
CE1B2707en
23.08.2008