1000Base-X Sfp Port - H3C S3100V2-52TP Installation Manual

Item
Interface attributes
Max transmission
distance
Transmission medium
Standards

1000Base-X SFP port

Every S3100V2-52TP switch has four 1000Base-X SFP ports, including two combo ports paired with two
1000Base-T Ethernet ports, on the front panel.
available for the H3C S3100V2-52TP Switch.
Table 10 1000Base-X SFP transceiver modules available for the H3C S3100V2-52TP Switch
Transceiver module
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
SFP-GE-LH40-SM1310
SFP-GE-LH40-SM1550
SFP-GE-LH70-SM1550
SFP-GE-LX-S
M1310-BI
DI
SFP-GE-LX-S
M1490-BI
DI
SFP-STACK-Kit
SFP-GE-T
Specification
•
1000Mbps, full duplex
•
MDI/MDI-X, auto-sensing
100 m (328.1 ft)
Category-5 (or above) twisted pair cable
IEEE 802.3u
Central
wavelength
850 nm
1310 nm
1550 nm
You must
TX: 1310 nm
use these
RX: 1490 nm
two
transceiver
TX: 1490 nm
models in
RX: 1310 nm
pairs.
N/A
N/A
Table 10 lists the 1000Base-X SFP transceiver modules
Connector Fiber
50/125 μm,
multimode
62.5/125 μm,
multimode
9/125 μm, single
mode
LC
9/125 μm, single
mode
N/A UTP/STP
RJ-45 UTP/STP
36
Max
transmission
distance
550 m
(1804.46 ft)
275 m
(902.23 ft)
10 km (6.21
miles)
40 km (24.86
miles)
40 km (24.86
miles)
70 km (43.50
miles)
10 km (6.21
miles)
1.5 m (4.92
ft.)
100 m
(328.08 ft.)