Appendix B Ports And Leds; Ports; Console Port; 10/100/1000Base-T Autosensing Ethernet Port - H3C S5120-SI Installation Manual

Appendix B Ports and LEDs

Ports

Console port

The switch provides a console port on the front panel.
Table 9 Console port specifications
Item
Connector type
Compliant standard
Transmission baud rate
Service

10/100/1000Base-T autosensing Ethernet port

The switch provides 10/100/1000Base-T autosensing Ethernet ports on its front panel. For the
quantity of 10/100/1000Base-T autosensing Ethernet ports of each switch model, see
and Table 8.
Table 10 Specifications for 10/100/1000Base-T autosensing Ethernet ports
Item
Connector type
Interface speed and operating
mode
Max transmission distance
Transmission medium
Standard

1000Base-X SFP port

The switch provides one or four 1000Base-X SFP ports on its front panel. The GE SFP transceiver
modules described in
Table 11 SFP modules available for the 1000Base-X SFP ports
Transceiver
module
SFP-GE-T
Specification
RJ-45
EIA/TIA-232
9600 bps to 115200 bps (defaulting to 9600 bps)
•
It can be connected to an ASCII terminal.
•
It can be connected to a serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
Specification
RJ-45
•
•
100 m (328.1 ft)
Category-5 unshielded twisted pair cable
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab
Table 11 are available for the SFP ports.
Central
wavelengt Connector
h
N/A RJ-45
10/100/1000 Mbps, full duplex
MDI/MDI-X, auto-sensing
Fiber
Twisted pair cable
40
Modal
Max
bandwidt
transmission
h
distance
(MHz*km)
N/A 100 m (328.08 ft)
Table 7