H3C S3100V2-52TP Installation Manual page 26

Item
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
If you perform no operation or press a key other than Ctrl + B within one second, once the
•
remaining waiting time becomes zero, the system begins to automatically start up and the following
information is displayed:
Starting to get the main application file--flash:/s3100v2-52tp.app!.................
...............................................................................
...............................................................................
....
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
.....................................Done!
System is starting...
Startup configuration file does not exist.
It will take a long time to get configuration file, please wait...
Retrieving configuration file failed!
User interface aux0 is available.
Press ENTER to get started.
If the "Press ENTER to get started" message appears, the automatic startup of the switch is complete.
Press Enter, and the following prompt appears:
<H3C>
Description
Delete files from the Flash memory
Modify the Boot ROM password
Enter the Boot ROM upgrade menu
Skip the current configuration file (this configuration is
valid once)
Disable or enable the Boot ROM password recovery
function. By default, Boot ROM recovery is enabled.
You can disable this function to protect system
security.
Set the startup mode of the switch
Restart the switch
20