Radyne DMD15 Installation And Operation Manual page 88

DMD15/DMD15L IBS/IDR Satellite Modem
Under Interface:
Under TX Setup:
Under Modulator:
Under Mod IF:
Under Demodulator:
Under Demod Data:
Under Demodulator:
Set Mode = Drop & Insert
Under Interface:
Under RX Setup:
Under Rx D&I:
Under Demodulator:
Under Demod IF:
Example 2: Multidestinational Remote Site Programming
Drop 512 Kbps from a T1 trunk, 3/4 rate Viterbi.
Extract 512 Kbps from a 1536 Kbps carrier and insert into a
T1 trunk, 3/4 rate Viterbi.
Drop 512 Kbps from a T1 trunk, 3/4 Rate Viterbi
Extract 512 Kbps from a 1536 Kbps carrier and insert into a T1 trunk, 3/4 Rate
Viterbi
TM051 - Rev. 5.8
Set Tx Type according to your hardware configuration (example:
G703BT1B8ZS)
Set Tx Clock = SCTE
Under Tx D&I:
Set Drop Mode = T1-D4
Use SATCh TS edit capability to define desired mapping of
Satellite Channels to drop Terrestrial Slots
Use Map Copy to copy Tx Edit to Tx Active
Set Frequency to desired value
Turn IF Output Power On
Set Data Rate = 512000
Set Conv Enc = VIT 3/4
Set Rx Type according to your hardware configuration
Set Buff Size to desired depth
Set Insert Mode = T1-D4
Set T1 E1 Frm Src = External
Use SATCh TS edit capability to define proper mapping of
Satellite Channels to insert Terrestrial Slots
Use Map Copy to copy Rx Edit to Rx Active
Set Frequency to desired value
Configuration setup is exactly as previously shown in Example 1.
User Interfaces
4-37