Radyne DMD15 Installation And Operation Manual page 124

DMD15/DMD15L IBS/IDR Satellite Modem
<1>
AUPC Remote BB
Loopback
<1>
AUPC Remote 2047
<2>
AUPC Target Eb/No
<2>
AUPC Minimum
Power
<2>
AUPC Maximum
Power
<2>
AUPC Nominal Power
<1>
Time Mark Transfer
Enable
<1>
Time Mark Transfer
Pattern Length
<1> Reserved
<1> Reserved
<1> TPC Interleaver
Opcode: <2602h> Command a modulator's frequency
<4> Frequency
Opcode: <2603h> Command a modulator's strap code
<2> Strap Code
Opcode: <2604h> Command a modulator's data rate
Data Rate
<4>
Opcode: <2605h> Command a modulator's filter mask
<1> Filter Mask
TM051 - Rev. 5.8
4 = 2.5 dB/Min, 5 = 3.0 dB/Min, 6 = 3.5 dB/Min, 7 = 4.0 dB/Min,
8 = 4.5 dB/Min, 9 = 5.0 dB/Min, 10 = 5.5 dB/Min, 11 = 6.0
dB/min
0 = Disable, 1 = Enable
0 = Disable, 1 = Enable
Target Eb/No at Receiver
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two's compliment)
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two's compliment)
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two's compliment)
0 = Disable, 1 = Enable
Unsigned Binary (4 to 16) Inclusively
Reserved
Reserved
0 = Disable, 1 = Enable
Selects the IF Frequency in Hz. The range is 50 MHz to 180
MHz for the 70/140 MHz type modems and 950 MHz to
MHz for the L-Band modems.
Note: This command also turns the carrier off to protect
the satellite.
Binary value
Note: This command also turns the carrier off to protect the
satellite.
Binary value, 1 bps steps
Note: This command also turns the carrier off to protect the
satellite.
0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1
User Interfaces
1750
4-73