Radyne DMD15 Installation And Operation Manual page 69

User Interfaces
CompClk Mask:
TxSynth Mask:
Major Rx (menu):
RxuProc Mask:
SigLoss Mask:
MfrSync Mask:
FrmSync Mask:
IF Syn Lock:
Rx Ovrsmp Lk:
Buf Clk Lock:
Minor Tx (menu):
Tx Activity (menu):
4-18
DMD15/DMD15L IBS/IDR Satellite Modem
parameter changes. A solid indication indicates a
hardware or programming failure within the modem.
{Pass/Fail, No/Yes}
Indicates that Tx Composite Clock PLL is not locked.
This alarm will flash on during certain modem parameter
changes. A solid indication indicates a problem with the
incoming clock to the modem (SCTE).
{Pass/Fail, No/Yes}
Indicates that the Tx IF Synthesizer is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication indicates a hardware or
programming failure within the modem.
{Pass/Fail, No/Yes}
Indicates a hardware failure within the modem.
{Pass/Fail, No/Yes}
Indicates that the demod is unable to lock to a signal.
{Pass/Fail, No/Yes}
Indicates that the Framing Unit is unable to find the
expected framing pattern.
{Pass/Fail, No/Yes}
Indicates that the Framing Unit is unable to find the
expected framing pattern.
{Pass/Fail, No/Yes}
Indicates the Rx IF Synthesizer is not locked. This alarm
will flash ON during certain modem parameter changes.
A solid indication indicates a hardware or programming
failure within the modem.
{Pass/Fail, No/Yes}
Indicates that the RX Oversample Clock PLL is not
locked. This alarm will flash on during certain modem
parameter changes. A solid indication indicates a
hardware or programming failure within the modem.
{Pass/Fail, No/Yes}
Indicates that the Buffer Clock PLL is not locked. This
alarm will flash ON during certain modem parameter
changes. A solid indication indicates a problem with the
Receive Buffer Clock.
TM051 – Rev. 5.8