Radyne DMD15 Installation And Operation Manual page 112

DMD15/DMD15L IBS/IDR Satellite Modem
<1>
Spectrum
<1>
Operating Mode
<1>
Clock Control
<1>
Clock Polarity
<1>
SCT Source
<1>
Framing
<1>
Drop Mode
<30>
Drop Map
<1>
T1D4 Yellow Alarm
Sel.
<1>
Forced Alarms
<1>
Alarm 1 Mask
<1>
Alarm 2 Mask
TM051 - Rev. 5.8
Fir
0 = Normal, 1 = Inverted
0 = Normal, 1 = 2047 test
0 = SCTE, 1 = SCT, 2 = EXT EXC
0 = Normal, 1 = Inverted, 2 = Auto
0 = Internal. 1 = SCR
0 = No framing, 1 = 96K, 2 = 1/15, 3 = EF AUPC 1/15
0 = Disabled, 1 = T1-D4, 2 = T1-ESF, 3 = PCM-30, 4 = PCM-
30C, 5 = PCM-31, 6 = PCM-31C, 7 = SLC-96, 8 = T1 D4 S, 9 =
T1 ESF S
Timeslots to drop organized by satellite channel
0 = Bit 2 equal 0 for all channels
1 = Frame 12 s-bits equal 1)
(0 = None, or else a 1 in the following bits means force)
Bit 0 = Backward Alarm 1 IDR and IBS
Bit 1 = Backward Alarm 2 IDR only
Bit 2 = Backward Alarm 3 IDR only
Bit 3 = Backward Alarm 4 IDR only
Bit 4 = AIS Request
Bit 5 = T1D4 Yellow Alarm. D&I Mode
Bits 6 and 7 = Spares
Bit 0 = Transmit processor Fault
Bit 1 = Transmit output power level Fault
Bit 2 = Transmit Oversample PLL lock
Bit 3 = Composite clock PLL lock
Bit 4 = IF synthesizer lock
Bit 5 = IDR 96 PLL lock
Bit 6 = RS FIFO fault
Bit 7 = Mod Summary fault
0 = Mask, 1 = Allow
Bit 0 = Terrestrial clock activity detect
Bit 1 = Internal clock activity detect
Bit 2 = Tx Sat clock activity detect
Bit 3 = Tx data activity detect
Bit 4 = Tx data AIS detect
Bit 5 = Tx clock fallback
Bit 6 & 7 = Spares
User Interfaces
4-61