Radyne DMD15 Installation And Operation Manual page 120

Radyne, inc. user guide modem installation dmd15, dmd15l
Table of Contents

Advertisement

DMD15/DMD15L IBS/IDR Satellite Modem
<1>
Alarm 2
<1>
Drop Status
<1>
Common Alarm 1
<1>
Common Alarm 2
Opcode: <2600h> Command a modem's control mode
<1>
Modem control mode
Opcode: <2601h> Command a modulator's configuration
Mode
<1>
<4>
Frequency
<2>
Strap Code
<1>
Filter Mask
<4>
Data Rate
TM051 - Rev. 5.8
Bit 1 = Transmit output power level. 1 = Fail
Bit 2 = Transmit Oversample PLL lock. 1 = Lock
Bit 3 = Composite clock PLL lock. 1 = Lock
Bit 4 = IF synthesizer lock. 1 = Lock
Bit 5 = IDR 96 PLL lock. 1 = Lock
Bit 6 = RS FIFO fault. 1 = Fail
Bit 7 = Mod Summary fault. 1 = Fail
Bit 0 = Terrestrial clock activity detect. 1 = Activity
Bit 1 = Internal clock activity detect. 1 = Activity
Bit 2 = Tx Sat clock activity detect. 1 = Activity
Bit 3 = Tx data activity detect. 1 = Activity
Bit 4 = Terrestrial AIS. Tx data AIS detect. 1 = AIS Fail
Bit 5 = Tx clock fallback. 1 = Fail
Bits 6 and 7 = Spares
Bit 0 = Frame lock fault. 1 = Fail
Bit 1 = Multiframe lock Fault. Valid in E1 PCM30 and PCM30C.
1 = Fail
Bit 2 = CRC lock fault. Valid in T1ESF, and E1 CRC enabled. 1
= Fail
Bit 3 = T1 yellow alarm received. 1 = Received
Bit 4 = E1 FAS alarm received. 1 = Received
Bit 5 = E1 MFAS alarm received. Not valid in FAS mode. 1 =
Received
Bit 6 = E1 CRC alarm received. 1 = Received
Bit 7 = CRC calculation error. 1 = Fail
Bit 0 = -12V alarm. 1 = Fail
Bit 1 = +12V alarm. 1 = Fail
Bit 2 = +5V alarm. 1 = Fail
Bit 3 = Reserved
Bit 4 = Battery. 1 = Fail
Bit 5 = RAM and ROM alarm flag. 1 = Fail
Bits 6 and 7 = Spares
Bit 0 = M&C processor fault. 1 = Fail
Bit 1 = U IO card present. 1 = Present, reserved in RCS10/10L
mode
Bit 2 = IF card present. 1 = Present
Bits 3 - 7 = Spares
0 = Front panel. 1 = Terminal, 2 = Computer
0 = Closed Net. 1 = IDR, 2 = IBS, 3 = D&I
Selects the IF Frequency in Hz. The range is 50 MHz to 180
MHz for the 70/140 MHz type modems and 950 MHz to 1750
MHz for the L-Band modems.
Binary value
0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1
Binary value, 1 bps steps
User Interfaces
4-69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmd15l ibsDmd15 ibsDmd15 idrDmd15l idr

Table of Contents