Device - Eyemax HD4K-1.0(A01) User Manual

1) Description of Location.
A. LAN: Connect by Local IP. If you are connecting from within your network you only
need to enter the IP address of the system into the S/W (example 192.168.0.50)
B. WAN: Connect by DDNS. If you are connecting from outside your network use the
DDNS to configure the S/W (example L123456.dvrhost.com).
C. WAN: Connect by IP address. If you are connecting from outside your network and if
you know your Static IP address, use the IP address to configure the S/W (example
http://124.137.23.72:6000 ).
2) Description of Symbols.
○ : Connected.
x : Not able to connect
△: There's some limitation - depends on Router or Network connection
★ : Need to use Port Forwarding
3) Description of Colors.
Yellow - Recommended
Grey - Not available
White – Depends on Router or Network condition.
2. How to use NVR for DHCP
Internet
: DHCP
DVR: DHCP
<Note> Each Router has different port forwarding settings. Please refer to the router manual
or contact to your router manufacture for assistance

7. DEVICE

Router:
:Port Forwarding /DMZ
DVR: Static IP
62