1. Manuals
  2. Brands
  3. Eyemax Manuals
  4. DVR
  5. DVS-9030
  6. Manual

Eyemax DVS-9030 Manual

9000 series
Hide thumbs
Table of Contents

Advertisement

Quick Links

E E yeMax 9 9 0 0 0 0 0 0 Series
D D VR R Man n ual l

Advertisement

Table of Contents
loading

Related Manuals for Eyemax DVS-9030

Summary of Contents for Eyemax DVS-9030

  • Page 1 E E yeMax 9 9 0 0 0 0 0 0 Series D D VR R Man n ual l...

  • Page 2: Table Of Contents

    - Software Selection - Parts Camera - Installing - Installation 3. Remote Client Installation Manual(Instant) Recording - Execution - Using Eyemax S/W Device - “Access Control Client” setup - Using the Web Browser - Network DVR Server 4.Uninstallation Web Sever...

  • Page 3: Hardware Specification

    E E y y e e m m a a x x 9000 Series DVR 1. Hardware Specification Models DVS-9030 DVS-9060 DVS-9120 DVS-9240 DVS-9480 DVS-9424 DVS-9448 Displaying Speed 30fps(NTSC) Recording Speed 30fps(NTSC) Video Inputs Audio Inputs Sensor Inputs Alarm Outputs...

  • Page 4: Software Installation

    Chapter 1 Software Installation E E y y e e m m a a x x 9000 Series DVR > Automatic Installation > Manual Installation > Remote Client Installation > Uninstallation > Program Execution...

  • Page 5: Automatic Installation

    (1) Definition 2. Double-click “Eyemax. English(5.1.0.0).exe”. It is a method to install all the relevant softwares automatically. Select “Automatic Installation” at all times unless only “Eyemax Client” is to be installed. (2) Installation Method Selection (3) Installing Drivers User’s Manual ( 5.1.0.0 )

  • Page 6: Dvr File System Installation

    1. Be very careful not to add “C Drive”, for it is used for O/S and the DVR softwares. 2. HDD has to be initialized to record data Initialization process will be performed automatically. Click “Close” upon completion. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 7: Completion & Retry

    At least one of “available disk drive” must be added for data storage. Otherwise, the alert message will pop up. (5) Completion & Retry Retry the entire procedure if an error message is displayed. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 8: Manual Installation

    3. Remote Client Installation (1) Definition (1) Using Eyemax S/W It is a method to install selected softwares manually. Select “Manual Installation” only in the case of “Eyemax Client” installation. Double click “Eyemax.english(5.1.0.0). exe”. (2) Installation Method Selection Select “Manual Installation”.

  • Page 9: Using The Web Browser

    6. To save live image to JPEG 7. To listen Audio of a selected channel applied only for authorized user remotely 8. Mode change between Live and Search 9. Log In/Out or EXIT 10. Display web browser information. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 10 2. Selection for image search 3. Play back(Fast back, Back, Stop, Play, Fast Play) 4. Save: AVI, JPEG, BMP 5. Audio 6.To change Tab to CONTROL 7.Log out and go back to LOG IN page User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 11: Uninstallation

    3. Select “Manual Installation”. 4. Click “Next” to finish Installation process. Find the icons on the desktop to execute “Eyemax DVR” and “Eyemax DVR Client”. Or find “Eyemax DVR” under “All Programs”. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 12: Main System Application

    Chapter 2 Main System Application E E y y e e m m a a x x 9000 Series DVR > Startup Screen > Login > Exit / Logout > System Information > Control Screen > Setup (System/Device/Event/Schedule/Network/User)

  • Page 13: System Information

    The default values for User and Password are “admin” and “no password”. Click “OK” to PTZ Adjustment execute Eyemax DVR system. To give “admin” a password and to create new users, certain configurations are required(Setup/User). Only “admin” and users with appropriate Touring authorization have access to the Setup menu.

  • Page 14: Dvr Information

    Make sure to always click and scan after S/W version change. Default: It sets “Event Recording Frame” and “Recording Frame” as default values. Create a DVR name and put in admin. info. They will be displayed on outgoing e-mails. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 15: System Power Management

    Exit & Turn off Computer : By checking this box, computer will be turned off automatically as a user exits from Eyemax DVR system. Click on the “E-map” button to design E-map. Click on “Open Map Image” to select an E-map image.

  • Page 16: Tv-Out

    TV-OUT is a function that sends selected cameras to a call monitor (external analog monitor). Click on the “TV-OUT” button for setup. The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 17: On-Screen Display

    2. Auto Channel Switching - Selected channels rotate to display at the switching interval set. * Switching Interval: The length of time to stay at one camera Postion Setting: Position change on screen display. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 18: Text Inserter

    On a camera screen, you may click one right mouse to control OSD as belows. Text Inserter Show Camera Names and Status : Text Inserter is a function that allows Eyemax DVR By checking it, camera names and status will be displayed on camera pictures. system to integrate with POS machines. Simply...
  • Page 19 Text Filter: Register important goods and useless text to display distinguishably and search POS data conveniently. Important goods items: Pre-registered items will be displayed in red characters. Useless text: It is not going to be displayed during transaction. About: Shows POS S/W version. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 20: Hard Disk Usage

    Camera, Output, Input, Audio and Alert. Accept Automatically: All devices in each category can be set up on one same page. To accept counter part’s IP-phone connection without checking a confirmation message. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 21: Camera

    Recording schedule, this function stop recording the channel. Pre-alarm (max. 10 sec.): Length of time to be recorded before event Post-alarm (max. 60 sec.): Length of time to be recorded after event User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 22 How to set: Click on “Add Zone” and select another zone desired to be detected. Note: If the number of zones exceeds 16, below error message will be appeared. Setting All: Selects whole area Delete Zone: Deletes zones one by one. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 23 [Object Detection] It is a function that marks all the changes occurred from the original scene. Eyemax will detect new & missing objects after a certain period of time (detecting interval). Click the right mouse and select Clear Object Object Detection Blocks Detection Blocks to remove all the blocks.
  • Page 24 Set: Set the first zone. Set 2nd Zone: Set the second zone to be detected. Clear: Clear the zone selected. Setting All: Selects all areas on the screen. Clear All: Clear all zones selected. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 25 4. Go to the “Control Screen” and find veiled areas. Note: 1. While using Mosaic, “Save” or “Print” can not be performed. 2. To see unveiled area, logging in as “Admin” or “Admin Mode” is required. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 26 It is a function that retains data only for the period set. For example, if 10 days is set, When using a PTZ camera, check the box and select a model name. Eyemax DVR Eyemax will delete all previous data before 10 days regardless of the capacity system supports nearly 40 different protocols.
  • Page 27 Bit per Second, and etc. Preset No. 1 position. 3. Click right mouse button on PTZ Screen and select “ PTZ Keypad”. Note: Now only limited Speed Dome models are available to run this keypad. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 28 Either click the right mouse on camera picture or click on the Preset (Touring) button for Preset (Touring) setup and use. [Preset] “Preset” is a function that enables a camera to move from one position to another automatically. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 29 3. Click on “Add”. 4. Select a preset. 5. Click “OK”. 6. Repeat the above to have more than 1 preset in the tour. 7. Click the right mouse to run the tour. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 30 Note: For more information about Access Control Integration, refer to the appendix 4, please. Advanced PTZ setup can be done by one right mouse click. Make sure that the PTZ camera to set up supports advanced PTZ control functions first. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 31: Output Device

    Output Device Input Device Eyemax DVR system can be equipped with as many as 8 output devices. Simply check the boxes for use. In addition, outputs Eyemax can be manually activated from system can be Control screen (Manual Alarm). equipped with as many as 16 input devices.

  • Page 32: Audio

    8 audio channels. Simply connect cameras to audio channels for use, and audio recording will Eyemax DVR system is equipped with 1 alert device. be completed as chosen. Alert is the beep inside the system that sounds in the case of event.

  • Page 33: Event

    Selected camera channel will pop up if the linked input device is triggered. The equipment of application: Events triggered by Input or Motion detection can pop on a desired screen among DVR system, DVR+TV-OUT 2, and DVR+TV-OUT 3 User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 34: Motion Detection

    One Input device can have as many as 8 activating output devices on activation. The above example shows that Output1 will be activated in the case of Input1 activation. Link to Alert: Input device can also be linked to alert. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 35: No Video Signal

    The same identical concepts and methods as “Input” are applied to “Recording Error”. event to Reboot, When “Recording Error” is occurred, it is linking to Alert and Output. User can link the Message on DVR. event to Reboot, Message on DVR. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 36: Schedule

    Reboot, Message on DVR. day and selective recording. R: Recording at all times E: Recording on event N: Stop recording H: Recording at all times and higher frame recording on event User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 37: Manual(Instant) Recording

    Manual (Instant) Recording It is a function that enables users to react on an emergency situation properly by making Eyemax start recording immediately. Use Scheduled Backup: To set backup automatically. Please refer to above example.

  • Page 38: Network

    “Narrowband”. Bandwidth: Make sure to select the right bandwidth to have the right network performance. Note: Eyemax will automatically appoint a proper IP address to router. No router setup is required. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 39: Web Sever

    E-mail “Central Station” is a function that enables Client with static IP to manage multi DVR sites. E-mail is a function that enables Eyemax Check the box and click on “Properties” for setup. DVR system to send out e-mails when selected events occur.
  • Page 40 Send camera(s) to send out image(s) when the event occurs. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 41: Dial Alarm

    DVR system to call out on selected events. Check the box and click on “Properties” for setup. Modem card must be installed inside Eyemax DVR system to make this function work. Type in phone (mobile) number to report. Click on “Reported Events” (same setup as Central Station) for more setup.

  • Page 42: Ip Address Setup

    Time Set: It’s a function that enables Administrator to set time for certain users to log in only for the Click right mouse and select Properties for IP setup for Eyemax DVR's network functions. time allowed User’s Manual ( 5.1.0.0 )

  • Page 43: View Log Application (Status)

    Chapter 3 View Log Application E E y y e e m m a a x x 9000 Series DVR > Screen Features - Event Log...

  • Page 44: Screen Features

    HDD Capacity: It shows HDD capacity used for recording. Event: It shows events occurred. Event Log: It shows all the previous events occurred by date. Network Client Log: Remote login records will be also kept on DVR server. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 45: Playback Application (Search)

    Chapter 4 Playback Application E E y y e e m m a a x x > Search Features 1 9000 Series DVR > Search Features 2 - Playback - Event/Object/Text/PeopleCount/AccessControlSearch - Monitoring & Searching - Bookmark & Go To - Save - Print - Backup...

  • Page 46: Playback

    Play Backward 2 Play 2 Default: Default for Zoom/Brightness/Contrast Play Backward Play Event/Obiect/Text/People count/Access control search Move to the First Data Move to the Last Data Move 1 Frame Backward Move 1 Frame Forward User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 47: Event/Object/Text/People Count Search

    Clear All: Click on it to clear all the motion detection zones set. Select channels for Event Search. Select one event from the event list and click “OK”, and the selected event will be displayed. Click “Refresh” to update the list. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 48 - Searched words will be retained in the combo ox in down-list format so the data 6. Delete/Delete All: To erase data in statistics can be easily shown in next search. 7. Report: To save it in text file User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 49: Monitoring & Searching

    The Pie Graph will show at a glance how many transactions have been performed, view live video. Click the right mouse again and select “Monitoring Off” to go back to “Search Mode”. compared to the number of people counted. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 50: Bookmark & Go To

    JPEG: For saving regular still images. Quality is not as good as BMP but less HDD is used. Save in JPEG with Time Period: For scheduled save in JPEG Go To: Select desired time to search and click “OK”. Watermark Setting Select each for desirable watermark setting. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 51 Saving video only (no audio) High Speed: Saving in high speed Click time period settings and put the time period that you want to save. Click on “Browse” to find watermark image or logo. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 52 [Save in JPEG Format] Click “Start” and select “JPEG” as you save images. [Save in JPEG with Time Period] Select time period and select channels to be saved in JPEG. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 53: Print

    After successfully back up the file, user can burn the data onto CD. The recorded data can be copied from the hard disk to external storage devices, such as CD-RW and DVD-RW. Back up recorded data using various backup devices. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 54 Backup Folder: Click the “Browse” button, select a drive to back up and enter a desired folder name. Play CD-Burning: Check to burn the backup data through an external Burning program. Log File: Shows “Backup Start Time”, “Directory”, “Status-fail or Success”. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 55 Any recorded data can be saved as “.exe” file. No viewer program is required to see saved data. Note : 1. file size limited up to 1 GB. 2. 1 channel backup only. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 56 3.After installing INCD, run “InCDL.exe” which is the InCD Launch Program. 4. Insert a blank RW CD and then start formatting it (If it is a brand-new one, click “Format” instead of “Quick Format”). User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 57 5. Leave the Eyemax Program and insert the blank RW CD which has been formatted. 6. Select “Backup” and click “Next” to start. 7. Select time period & password and click “Browse” to create a folder. User’s Manual ( 5.1.0.0 )
  • Page 58 [Run CD Burner ( For WindowsXP Users Only)] Windows XP users can back up data directly in a CD without exiting the Eyemax Program. 1. Tick the “Save in CD data of backup” box and click “Next”. User’s Manual ( 5.1.0.0 )
  • Page 59 7. Identify the maximum file size indicated. An attempt to back up more than the size 4. Create folder name if it should be used and click “Next”. indicated will result in a failure. 5. CD information will be shown as below. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 60 8. After completing back up, find the files created in the CD. 1. Click the “Start” button and run the “DVR’s Playback Program”. 2. Select a folder (subfolder) to see saved data. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 61: Remote Monitoring System (Client)

    Chapter 5 Remote Monitoring E E y y e e m m a a x x System 9000 Series DVR > Program Execution > Remote Save and Backup > Real Time Audio...

  • Page 62: Program Execution

    1. Program Execution Double-click on the “EyeMax DVR Client” icon on the desktop to execute Remote Monitoring System (Client). Click “Add” to register DVR servers, There can be more than one DVR server registered. Select one from “Servers”, click on “Login” and type in password to log in.

  • Page 63: Remote Save And Backup

    Note: Changing “Setup” remotely can be done if remote user is “Admin” or “Admin Mode”. 2. Click the right mouse to stop saving. Remote Backup can also be done. The same procedure is used as “DFS Backup”. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 64: Appendix 1

    Appendix 1 POS DVR E E y y e e m m a a x x > Hardware Installation 9000 Series DVR...

  • Page 65: Hardware Installation

    RS232 Serial Cable c. RS232 Serial Cable h. POS Printer d. RS232 Serial Converter (9 pins into 25 pins) e. Gender Changer i. Point of Sales (POS) f. a + d + e User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 66 (2) Installation “b” goes into the COM Port 1 of “g”. “a” goes into the serial port of “h”. “c” goes into the serial port of “i”. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 67: Installation

    Appendix 2 I-phone E E y y e e m m a a x x > Installation > Execution 9000 Series DVR > Audio Setup...

  • Page 68: Installation

    Property : The default port number is 8015 and the default timeout value is 5 seconds. Click “Finish” to complete the process. Leave them as they are unless other values must be used. [ EyeMax ] User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 69: Audio Setup

    Go to “Control Panel”, “Sounds, Speech and Audio Devices” and “Sounds and Audio Devices”. Then, go to “Audio”, “Sound playback” and click “Volume”. Recording Control should be set up this way. [ EyeMax ] User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 70: Appendix 3 Mdvr

    Appendix 3 MDVR E E y y e e m m a a x x 9000 Series DVR > Installation > Overview > Execution...

  • Page 71: Installation

    (3) On Installing Start: Click “Next” to start installation process. Start: Click “Next” to start installation process. (2) Selection of Installation Method (4) Finish Select “Automatic Installation”. Click “Finish” to complete installation. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 72: Overview

    Make sure to put in the same user and password used on DVR. 4. Repeat the above steps to register more sites. Click on the “Properties” button to register group and site. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 73: Log In & Log Out

    (3) Setup (2) Log in & Log out Click on the “Setup” button to use different opions. Click on the “Log in & out” button to log in. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 74 Click on the right mouse and select “Save Setting” to save image and camera Click on the “E-Map” button to configure E-Map. locations. To create an E-Map image, click on the right mouse and select “Open E-Map”. Only BMP file can be in use. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 75: Search

    Image can be saved either in BMP File or in JPEG File “Event” displays all the events coming in from registered DVRs. Select a site and click on the right mouse to connect. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 76 Backup Back up recorded data using various backup devices. If password is set, viewing backup data will be possible only when it is typed in. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 77: Appendix 4 Access Control Dvr

    Appendix 4 Access Control E E y y e e m m a a x x 9000 Series DVR > Configurtion Diagram > Installing FP Server > Installing “Access Control Server” > DVR Setup > Access Control Search > Access Control Client...

  • Page 78: Configuration Diagram

    For more information for “Terminal Setup”, please refer to Access Control user’s guide and TCP / IP FPS Server Program manual” which will be provided separately. 3. Installing “Access Control Server” Network Server (FP Server) 1. Install “FPServer_Setup_V2.09” 2. Install “Access control Server” User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 79: On Installing

    4. DVR setup (1) On Installing (1) Set up. (2) Finish: Click “Finish” to complete installation. Click “Access control” button on camera set up page. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 80: Access Control Search

    1. Click the “Access Control” Search button 1. Type Access control’s IP address. 2. Click “OK” to finish set-up. 2. Set time period and click “Search” 3. Double-click the searched data to see captured image of the site. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

  • Page 81: Access Control Client

    1. Double-Click Access Control Client software. 2. Click “set up” button. Start: Click “Next” to start installation process. (2) Execution 3. Fill in Server(DVR)’s information. 4. Type IP Address and User name / PW of DVR server. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...
  • Page 82 5. Click “OK” to log-on to the DVR server. 6. Set time period that you want to search. 7. Click “OK”. User’s Manual ( 5.1.0.0 ) [ EyeMax ]...

This manual is also suitable for:

Dvs-9060Dvs-9240Dvs-9120Dvs-9480Dvs-9424Dvs-9448

Table of Contents