Table of Contents
Advertisement
2.
Use the Left/Right buttons [
displayed with options in the left-hand column and settings in the right hand column. A
cursor (highlighted menu) can be moved using the directional buttons [
3.
SENSOR INPUT: Change the input type. Use the [-, +] buttons to change the values.
Note. Alarm of IP camera can be configured in CAMERA menu (Chapter 2.2)
4.
RELAY OUTPUT: you can configure how the Relay Outputs are controlled: automatic or
manual.
1) Use: Change the output type.
2) Inactive: Select turn off method of Relay Out.
a. Event (Automatic): Relay Out is turned OFF when the event expires. This setting
is configured globally.
b. Manual: Relay Out is turned OFF from this menu <Control>.
3) Event Edit
- Press [OK] to edit multiple events. The menus are displayed with options in the left-
hand column and settings in the right hand column. A cursor (highlighted menu) can
be moved using the directional buttons [
- Change the options below using the [DEC/INC] buttons on the IR remote, or click the
mouse.
- System menu contains below
2. HDD Disk Fail
3. Record System Fail
4. Temperature Warning.
5. Fan Lock Warning
6. Voltage Warning
7. Low RTC Battery Warning
8. External Device Event
9. Network Link Disconnected
] to select "I/O Terminal" menu tab. The menus are
] on the IR remote or front panel.
65
].
Advertisement
Table of Contents
