General - Eyemax HD4K-1.0(A01) User Manual

7.1. GENERAL

1) DISPLAY : Please decide output video resolution
 It can be set to the correct video resolution on the monitor.
[1920*1080P(default) 800*600  1024*768  1280*720  1280*1024
 HDMI AUTO
Automatically detects and sets the HDMI resolution on the monitor connected to the
NVR. It might display "no video" if a VGA monitor is not able to support high
resolution.
In order to connect HDMI and VGA output to use both monitors, please set up
<NOTE>
as the lowest resolution without selecting HDMI AUTO.
2) Keypad Model: Select Joystick Controller and Baud Rate.
3) Extend Device: Select a model of POS/ATM.
4) PTZ Event: DURATON [OFF,1SEC ~ 5 SEC]: Select PTZ EVENT duration.
5) Alarm Out: DURATON [OFF,1SEC ~ 5 SEC]: Select Alarm duration.
6) IP CAM SET UP :
After click
network will be listed in the IP CAM Discovery menu.
A. HOST ID : It shows HOST ID of IP camera.
 1600*1200  1680*1050  1920*1080I]
in the menu, all IP cameras which are connected in LAN
63