Product Installation; Power Connection; Connecting External Device - Eyemax TVST PVT3-04N5 User Manual

CH 2 Installation Method and Cautions

2-2 Product Installation

This product may be composed of camera and monitor in default, and additionally
the sensor, microphone, speaker and PC for network can be connected if necessary.

2-2-1. Power Connection

1) Connect adapter or power cable to power input terminal at rear side.
(free voltage from 100V to 240V, 50/60Hz)
※ You must operate it at the rated voltage instructed on the user's manual. In case
power higher than the rated voltage is supplied, it may cause damages on product.

2-2-2. Connecting External Device

※ Connect it when power of the product is off.
※ Read through user's manual for the device you are connecting carefully.
1) How to Connect External Video/Audio Device
MIC
CAMERA
Connect cameras to VIDEO IN PORTS by channels.
Connect microphone (AMP) to AUDIO IN by channels.
Connect VGA OUT to VIDEO IN of monitor.
Connect HD output to HD Monitor.
Connect AUDIO OUT to AUDIO IN of monitor (or speaker).
15