Table of Contents
Advertisement
1.2. SWITCH Setup (Monitor Configure)
The menus are displayed with options on the left-hand column and settings in the right hand
column. A cursor (highlighted menu) can be moved using the Direction buttons [
1. Settings
1) Device: It is set by Main monitor .
2) Dwell Time: Select the interval that each camera or Multi screen mode is displayed in
a rotation. Use [-, +] button to change : [1 second ~ 30 second]
3) Mode: Select the appropriate monitor display to making any adjustment. This Mode
will be activated while it's in Switch Mode.
a. Sequence: Automatic Sequence.
b. Shift: Selected camera will be displayed after dwell time.
c. Event: To display particular camera in full screen or in multi mode when event
triggered.
4) SPLIT MODE : Select desired sequence mode to switching.
5) USE CHANNEL: Select the cameras to be inclcuded or excluded from the automatic
27
] .
Advertisement
Table of Contents
