Table of Contents
Advertisement
2.4.
DEVICE
1)
MOTIOM
Press SETUP button to set up motion function.
a. Motion Zone : Set up to 4 Motion areas defined by selected parts.
b. Motion Grid : The area property is highlighted and motion detection can now be
observed in the view window. By default, it's set to OFF.
: : Clear All. Press [OK] to select.
c. Motion Level : The sensitivity settings are : 1: Low sensitivity ~ Level 20: High
sensitivity. By default , the level is set to 10.
d. APPLY : Save changed set up.
e. SAVE : Save changed set up and exit automatically.
: Select All. Press [OK] to select.
: Select specific. Press [OK] to select.
To define the motion view area cell-by-cell, do the
following:
On the front panel or remote control, press any of
direction buttons to highlight a cell in the motion
detection area, then press [OK]. This area is selected
and the cells are highlighted in a blue color.
31
Advertisement
Table of Contents
