Operation; Log In/Out - Eyemax HD4K-1.0(A01) User Manual

V. OPERATION

1. LOG IN/OUT.

You must log on to the NVR with valid password to operate the NVR. By default, it comes
with one login account; ADMIN and the default password is "000000".
<Note > If you are logging on for the first time, the system does not prompt you to change
the default password. Therefore, it's strongly recommended to change the "PASSWORD"
when you install the NVR. Refer to [System Setup].
1. Login
1) On the front panel or remote control, press the power button.
2) When the NVR is powered on, it will start to scan NVR status.
3) Live Viewing screen will appear after initialization about 50sec. It can be delayed
when you have defect HDD, it will try to fix for logical problem but it will show you
warning message for physical problem.
4) On the remote control, press Login. Using the mouse, click the login icon, login
dialog box pops up.
5) Login Icon
2. Logout
On the remote control, press LOGIN. Using the mouse, Press Login icon again,
indication you are logged off.
will be changed on status bar.
24