Table of Contents
Advertisement
7.3. PTZ EVENT
When an Alarm is triggered, Motion detected or Video Loss occurs, this NVR sends a preset
command to a PTZ camera. The PTZ option must be enabled and a protocol must be
assigned to the camera channel.
1.
Channel: Select desired PTZ camera.
Active: Configure PTZ action [ NONE GOTO TOUR ] and Preset number or Tour
2.
group when an event is detected.
3.
Inactive:
4.
Event Edit.
Press [OK] to edit multiple events. The menus are displayed with options in the left-
hand column and settings in the right hand column. A cursor (highlighted menu) can
be moved using the directional buttons [
<Note> Do NOT set up Motion detection on the PTZ camera used for a PTZ event. The
signal will be looped.
5 . Save changes and exit the menu, press the [MENU] button.
Exit the menu without making changes, press the [ESC] button.
Select Camera position after the event duration expires.
②
①
] on the IR remote or front panel.
67
④
③
Advertisement
Table of Contents
