Table of Contents
Advertisement
2. Auto Back Up (FTP)
1. Use the [-, +] button to change the selected device to FTP
2. Use the directional buttons to move to FTP Setup. The menus are displayed with options
in the left-hand column and settings in the right hand column.
ITEM
Select Highlight FTP Server and then press numeric buttons to define an FTP server.
Server
Define the port that the FTP server will communicate through.
Port
Enter the user ID of FTP Server.
User ID
Enter the password.
Password
Select PASSIVE mode or REGULAR Mode.
Connection
The path should be made in the FTP server in advance. Mac address is set with the
BACKUP
default in consideration of the scenario where lots of NVR's backup files to the same
PATH
FTP server.
<Note> Please Refer to [LOCAL PLAYER]/ [Mini-Player] section to read about back-up file
ADJUSTMENT
88
Advertisement
Table of Contents
