Update - Eyemax HD4K-1.0(A01) User Manual

8.4. UPDATE

1. Download the latest firmware file and copy to USB Flash memory stick in the Root
directory.
<NOTE > Please make sure you download all of files below (20M).
hd4k_all.00.00.00.img
2. Connect or insert into Front USB (please stop recording first).
3. Use directional buttons to move to the [Start] button. Press the [+] button to find upgrade
files. If the NVR finds a valid upgrade file, the update menu is activated.
4. Press the [-, +] buttons to find correct upgrade file. Version information is displayed. If
there are several valid update files, please check the display for the correct one.
5. Use the directional buttons to move to the [Start] button, then press [OK] button to start
updating. While updating, an "in progress #%" message is displayed.
6. After the update process is complete, a "Success" message is displayed. Press the [OK]
button to restart. The NVR issues a single beep, if Micom update is included.
NOTE 1 Do not switch OFF or PRESS any key during the update process.
NOTE 2 Please consult your distributor or installer before update this.
72