Viii.playback /Search; Playback; Time Search - Eyemax HD4K-1.0(A01) User Manual

VIII.PLAYBACK /SEARCH

The NVR supports 2 playback modes; Playback and Search. The NVR offers a variety of
search functions that enable you to quickly and efficiently locate and review a specific period
from the database. It supports three different search modes: Date/Time, Event, Event Area
and Log Search.

1. Playback

When the [PLAY] button is pressed, the NVR starts to play back any recorded data from
the latest data, whether in live or recording mode. When the NVR reaches the end of
the recorded data, it stops the playback.
During the playback, the NVR may be played back in reverse, paused, speed search up
to 16 times the normal speed, or move through picture by picture.

2. Time Search

2.1 Multi Channel Playback
1. Press the
be displayed. The data is colour-coded by category: EVENT (Red) > Normal
(Yellow)
2. Use the [+] button to navigate to the desired Day

Minute (30 sec). Use the [-] button to go back Minute (30sec)
 
Hour
When using the mouse, the wheel is used for the [+/-] button.
<Note> Use the [Play] button to move to the end of data
Use the [Rewind] or [Fast-forward] buttons to move to the next page.
3. To review all channels, press the [OK] button on the slot on the bar. When using
[Time Search] button to access the time search table. Day will
Day.
78
Day, Hour, Minute
Channel
 
Hour Minute (5min)

Minute (5min)