ANUAL Safety Precautions Turn off the power of the product before Because the cable connected to this device installing the product. Do not plug many can be damaged, keep at least 15cm of plugs into one outlet clearance between where the product is installed and where the power outlet is.
Page 3
ANUAL CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Two Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage”...
Page 4
ANUAL Caution Please read the following precautions carefully before installing the product and follow the directions for installation. Do not install the product where the level of humidity, dust or smoke is high. Do no install the product where it is exposed to direct sunlight or close to the heating device. ...
- Maximum of 25IPS@944 X 576 at PAL per channel Supports various recording resolutions and qualities. - 960H(944x480), D1(720x480), Half D1(704x240), CIF(352x240) at NTSC - 960H(944x576), D1(720x576), Half D1(704x288), CIF(352x288) at PAL - 5 stage recording qualities (Very high, high, normal, low, and very low).
’ ANUAL 1-2. Contents Software Installation CD User’s Manual Screws Mouse SATA cable HDD power cable Power cable Remote control Adapter Reference: The type of components can be applied differently by the option. 1-3. Front Panel ① Power LED – Turn on when the power is turned on. ②...
ANUAL 1-4. Rear Panel A. 4 channel DVR ① Camera video input – Connect cameras. ② Main output port – Connect BNC type monitor. (It outputs the same video as MAIN output.) ③ Audio input port – Connect audio input port of external device. ④...
ANUAL 1-5. Connection and initial settings Caution The camera or other external devices can be connected to this device in numerous methods. Refer to the user manual of the camera or other external device for addition information on connection methods. ...
ANUAL 1-6. RS-485 connection ① This device has 1 data port (RS-485). ② Use this port to connect the PTZ camera. ③ PTZ camera Connect the PTZ serial communication cable to the RS-485 port. When connecting the cable, make sure that the TX- of the device is connected to the RX- (TX-) of the camera(keyboard), and TX+ of the device is connected to the RX+(TX+) of the PTZ camera(keyboard).
ANUAL 1-8. Internal hard disk installation The hard disk installed inside the device is a precision device which can be damaged even with the small impact. To prevent the hard disk from being damaged, manage the device as follows. To prevent the data loss, it is recommended to back up any important data into an external storage device.
Page 14
ANUAL Hard disk installation of replacement A. Hard disk installation After turning on the power of the device, unplug the power from the outlet. ① Loosen the screw on the left, right and rear side of the product. ② Separate the cover of the main unit. ③...
Page 15
ANUAL ⑦ Tighten the screws with HDD and main unit. ⑧ Close the top cover and assemble with screw. B. Hard disk replacement First turn of the power of the device and then unplug the power. ① Loosen the screw on the left, right and rear side of the product. ②...
Page 16
’ ANUAL C. Recommended list of hard disk - Hard disks of below are the ones proved to be compatible through experiment. - Please refer to when adding or replacing the hard disk. Manufacturer Model name Capacity ST3250312CS 250GB ST3500312CS 500GB ST500DM002 Seagate...
Page 17
ANUAL 2-1 Operation -------------------------------------------------------------------------- 17 Start up ..................17 Shutdown ..................18 2-2 Live Display ----------------------------------------------------------------------- 19 2-3 System setting -------------------------------------------------------------------- 23 System ..................23 Video/Audio ................. 27 Event ..................32 Network ..................35 User ................... 40 2-4 PTZ Control ----------------------------------------------------------------------- 43 2-5 Search (playback) &...
ANUAL 2-1. Operation 1) Start up Turn on this device, then it boots with power indicator light turned on. Pressing button, then the login window would be displayed. Select user and press “OK” button to continue. ① ② ① [USER] ...
ANUAL 2) Shutdown While the status is logged in, Press button, then logout window will be displayed as below. ① ② ③ ① SELECTION: Select the Log Out or EXIT. ② USER: Display current user has logged.(admin /user1/user2/user3) ③ PASSWORD: Input password. Click “OK”...
ANUAL 2-2. Live Display ① [Camera name] Shows camera name If you want to modify camera name, you can do so by selecting [Setup] [Camera] [Channel] ② [Status icon] (OSD) Status icon shows current status of camera/recording. ...
Page 21
ANUAL ③ [Channel selection] Selected channel shows red rectangle on the edge of the screen. Press “OK” button on the remote controller to enlarge selected channel. ④ [Live view] It shows current live view as real time. ⑤...
Page 22
ANUAL 6) [System information] It shows information of system 7) [Log in / Log out] It can be used for Log in, Log out, or Shutdown the DVR A. [Time bar] It shows current time status. B. [Divided screen display] ...
Page 23
ANUAL [System control toolbar – Search screen] ② ③ ④ ⑤ ⑥ ① ① ⑪ ⑧ ⑨ ⑩ ⑦ ⑪ ⑫ ⑬ ⑭ 1) [Playback date/time] It shows the date/time currently playback. 2) [Live screen] Click Live button to enter live screen. 3) [Search screen] ...
You can specify the system configuration by this menu. Use ◀ / ▶ button to change configuration. A. Video Type: Select camera type 960H or 720H. B. On-Screen Display Mode: Select screen resolution. ※ 4ch DVR support up to 1280x1024.
Page 25
ANUAL ② [Date/Time] Specify date and time of system. You can specify setting by using ◀ / ▶ button Select date and time, then you will see virtual keypad as below. A.Date: Specify current date B. Time: Specify current time C.
Page 26
ANUAL ③ [F/W Update] You can run firmware update. A. FILE: You can specify the firmware file to update using ◀ / ▶ buttons. ④ [Setting update] A. IMPORT: You can replace current setting values with new values from USB memory. (OFF/ON) B.
Page 27
ANUAL ⑤ [Initialization] You can initialize data and configuration by this menu. A. System log: Delete all event log. B. Settings: Delete setting of configuration. C. Recorded data: Format HDD data. D. Remove all(Factory default): Delete entire data in the system and restore as factory default ...
ANUAL 2) Video/Audio On the Video/Audio menu, camera, recording, schedule, color, OSD and PTZ can be configured. ① [Camera] ① You can specify channel name and audio for each camera. ① ② ③ ④ ⑤ ⑥ A. Camera : Select camera to change B.
Page 29
A. Total frame: Max frame rate has restricted by screen resolution. B. Camera: Select camera to set frame and quality. C. Resolution: Specify screen resolution. (CIF / HALF D1 / D1 / 960H) D. Normal frame rate: You can specify recording frame rate when recording method is continuous for selected camera.
Page 30
ANUAL ③ [Schedule] You can specify recording method by schedule with date and time. Click time table to change recoding method. Click channel number to change recording method for all time. Click time label to change recording method for all channel. Click ‘APPLY ALL’...
Page 31
ANUAL ④ [Color] You can adjust brightness, contrast, saturation and hue. ⑤ [PTZ] This is to setup the PTZ configuration. A. CAMERA: select camera to setup PTZ. B. DEVICE NAME : Select camera name.(Max 15 cameras are supported) DSC230 / Sony Co.,Ltd HSDN251 / Honeywell Co.,Ltd LPT - A100L / LG Co.,Ltd...
Page 32
ANUAL 13. SPD-2300 / 3000 / 3300 / SAMSUNG Co.,Ltd 14. SUNGJIN / SUNGJIN Co.,Ltd 15. TPD7720 / DYNACOLOR,INC 16. V1305R-DC / V1300RB / CRX – 1013 / VICON C. DEVICE ID: Select ID that configured in camera. D. BPS: Bit rate Per Second for data transmission. Default value of BPS is ‘9600’...
ANUAL 3) Event You can specify the processing when event occurs like sensor, motion detection, video loss, and the event filter settings when event occurs. ① [Motion detection] You can specify the process when motion is detected. A. Camera: Select camera to setup event. B.
Page 34
ANUAL Select all: Selecting entire area. Unselect all: Unselecting entire area. Save: Saving selected area as a motion detection zone. Exit: Exiting motion zone setting. D. Sensitivity: Setting the motion sensitivity. (Very High/High/Normal/Low/Very Low) E. Pixel Sensitivity: Setting the pixel sensitivity. (High/Normal/Low/Very Low) F.
Page 35
ANUAL ③ [Event filter] Specifying the event which will be sent to the central monitoring center and E-mail. A. System start: Enabling or disabling the system start event. B. Shutdown: Enabling or disabling the system shutdown event. C. Setting change: Enabling or disabling the setting change event. D.
ANUAL 4) Network You can set the network environments. ① [TCP/IP] You can specify the TCP/IP setting according to network environment. Specifying the TCP port number of Web, Playback and Live. Default values: Web(80), RTSP(7700), Playback(9091), Live(9092) For dynamic IP ...
Page 37
ANUAL ② [Streaming] You can set each item about the network video streaming. A. Total frame: : Total frame rate set / Maximum available frame rate ※ 4ch DVR: D1 30fps, 8ch DVR: D1 60fps, 16ch DVR: D1 120fps B.
Page 38
ANUAL ③ [DDNS] You can use DDNS service: Recommend to use www.dvrname.net. You can connect to DVR easily using host name instead of IP address with DDNS (Refer to www.dyndns.org in case of using dyndns) A. Mode: Enabling or disabling DDNS. B.
Page 39
ANUAL ④ [CMS] Specifying IP address and TCP port number of CMS. A. MODE: Enabling or disabling event report to the central monitoring center when event occurs. B. CMS ADDRESS: The IP address of the central monitoring center. C. PORT: The TCP port number of the central monitoring center. ※...
Page 40
ANUAL B. Smtp server: Setting the IP address or domain name of SMTP server. C. Port: Setting the TCP port number of SMTP (Default value is 25). D. Account: Setting the E-mail account registered in SMPT server. E. Password: Setting the password of the E-mail account. F.
ANUAL 5) User You can create new user, modify authority, delete user. ① [User list] You can view the list of all users. ② [Create user] A. Total: It displays the number of registered users and the maximum number of users can be registered.
Page 42
ANUAL D. Authority items: Specify each authority item for the user id. Setup Manual alarm Search Backup Network Multi login Audio E. Cameras: Specify the cameras which the user can see. F. Auto Logout: Turn on/off Auto logout from local and network(Off / 5 Min / 10 Min / 30 Min / 60 Min) ③...
Page 43
ANUAL Audio E. Cameras: Specify the cameras which the user can see. F. Auto Logout: Turn on/off Auto logout from local and network(Off / 5 Min / 10 Min / 30 Min / 60 Min) ④ [Delete user] ① Select user id to delete. H.264 R...
ANUAL 2-4. PTZ control It is used to control PTZ camera which is connected at RS-485 port. Settings of camera and DVR should be done if you are to control PTZ camera. 1. Click the icon to control PTZ. 2.
Page 45
ANUAL Setting a new preset position Move camera position using direction button ⑤. Select the preset number to set using button ⑨. Click button ⑪ “SET”. Repeat process 1 ~ 3 stage to set another preset position. ※ Preset numbers are available up to 10. ※...
ANUAL 2-5. Search (playback) & backup Various features are available for user to search recorded data easily. 1) Time search You can search recorded data with date and time. How to search recorded data Click button on main menu bar. Select the date you want to search on the calendar above.
ANUAL 2) Event Search You can search recorded data using event occurrence time. A. Click the button on the main menu bar which is located in the lower position of search mode screen. B. Use buttons on the upper right side to select camera to search. C.
ANUAL 3) Backup You can back up the recorded data which you select date/time and channels. Click mouse on the icon of the menu bar which is located in the lower position of the screen. Select a device to backup data will be stored. Select media type.
Page 49
ANUAL The message “BACKUP STOP” will be shown when backup is finished. How to cancel backup If you press button when backup is running, the selection message will be shown as below. Click “OK” button to cancel backup. Erase Media ...
Page 50
ANUAL You can backup automatically daily based by schedule backup. If you are to use schedule backup, set “Use schedule” to “ON”. Enter the time to execute backup at “Backup time”. If USB memory stick is not connected or has no free space, backup cannot be executed.
ANUAL 2-6. HDD defect test In case HDD is defected, following message displayed to report to the user. A. Test period. - When DVR start up after installing new HDD(Each HDD test takes around 5~6minutes). - When DVR reboot abnormally 5times(Each HDD test takes around 5~6minutes). - Every 6hours after start up DVR(Each HDD test takes 1~2seconds).
Page 52
ANUAL 3-1 Installation ----------------------------------------------------------------------- 52 1. Web viewer installation ............52 3-2 Functional description ----------------------------------------------------------- 54 1. Web viewer monitoring window ..........54 2. Web viewer search window ............55 3. Search menu ................ 56 4. Saving as AVI file dialog box ............. 57 H.264 R...
ANUAL 3-1. Installation Set up the network before the installation. 1. Web viewer installation ① Enter the DVR IP address in the Web address window, and then the following Active X installation window will be displayed. ② When you click on the Active X install button, the following window will be displayed. Press the Install button.
Page 54
ANUAL ③ Press the Next button from the Web View installation window. When the installation is completed, the Web initialization screen will be displayed. (General installation recommended) ④ Enter the ID and password. (Multi-login is not enabled and you must log in to the DVR with an unused ID.
ANUAL 3-2. Functional description 1. Web viewer monitoring window ③ ② ④ ⑤ ⑥ ⑨ ⑦ ⑧ ⑪ ⑩ ⑫ ① ⑬ ⑭ ① Divide screen division (Full screen/1/4) ② Selecting a camera ③ Real time image capture (Save as JPEG) ④...
ANUAL 2. Web viewer search window ③ ④ ⑤ ⑧ ⑦ ⑥ ⑩ ⑨ ⑪ ② ① ⑫ ① Divide screen division (Full screen/1/4) ② Selecting a camera ③ Saving video or still image (Saving as AVI/JPEG/BMP) ④ Date/Time selection button to play back (Refer to 3. Search dialog box) ⑤...
ANUAL 3. Search Menu ① ② ③ ⑤ ④ ⑥ ⑧ ⑦ ① Recorded data graph (Click on the data graph to select time to play.) ② Time scroll bar ③ Zoon in/out of graph (It can be scaled from 2 hours to 24 hours by minute unit.) ④...
ANUAL 4. Saving as AVI file ① ② ④ ③ ⑤ ⑥ ⑧ ⑦ ⑨ ⑩ ① Camera name/Date/Time which is currently displayed. ② Starting AVI saving (File name is requested when you click on this button.) ③ Stopping AVI saving ④...
ANUAL 4-1. Description 1. Software Installation How to install i-Smart Viewer APP through iTunes and Android market. 1) On the PC web browser, Visit http://itunes.apple.com/app/i-smart-viewer/id399765847?mt=8 Visit https://market.android.com/details?id=com.livezen.iSmartView&feature=search_result 2) You will see below web page and click « View in iTunes » 3) Click “Free APP”...
Page 61
ANUAL 4) Sync iTunes and your iPhone / iPod to install Application to your iPhone / iPod. 5) You will see i-Smart icon in the iPhone / iPod. How to install i-Smart Viewer APP on the iPhone / iPod APP Store 1) On the iPhone / iPod, run APP Store Application.
ANUAL e View / Toolbar 2. Liv Move Back to DVR List Shows Shows Camera name registered DVR name Display Live Screen - Drag screen to move channel. (Drag to left: move to next channel) (Drag to right: move to previous channel) Control Bar - If PTZ camera is connected, PTZ icon and control icon will be enabled.
ANUAL 3. Screen Division mode (1 / 4) Touch icon to select screen division (Switch screen division mode to 4 CH mode) Camera Information 4 Channel mode - Drag screen to Left / Right : move to next / previous 4 cameras - Touch channel to enlarge selected channel as 1 camera mode.
ANUAL 5. Preset / Tour Control Select Preset / Tour mode When preset or tour is set on the DVR, this icon will be activated. Camera Information - Change channel by drag or touch arrow button. - Touch channel name to move selected channel. 8.
ANUAL 6. Album Tab Album Tab is to see saved still image by snapshot function. Search Image by file name Saved file list (Shows DVR name, camera number, YY/MM/DD Hour:Min:Sec) Switch to List mode / Thumb Nail mode [List mode] [Thumb Nail mode] 7.
ANUAL 8. Edit Tab Edit Tab is to edit DVR access information. Search DVR From list Select DVR to edit Touch OK to save Modified information H.264 R...
Page 67
ANUAL 5-1 Check before requesting for service ------------------------------------------ 67 5-2 Recommended device to use --------------------------------------------------- 70 5-3 Initial setting list for factory default ------------------------------------------- 72 5-4 Product specification ------------------------------------------------------------- 78 H.264 R...
ANUAL 5-1. Check before requesting for service Check before requesting for service. If the following symptoms are observed when using the product, recheck the following. It may not be a problem. Symptom Checkpoint and resolution Check whether the power plug is correctly plugged. I cannot turn on the power of Check whether the voltage of the power supply is correct.
Page 69
ANUAL Symptom Checkpoint and resolution Check whether the recording audio channel is correctly set up. I cannot hear the audio recorded Check whether the connecter on the rear side of the device is connected with the video. with external device (Line input) correctly. Check whether the connected external device is operating correctly.
Page 70
ANUAL Symptom Checkpoint and resolution When the E-mail transmission fails without SMTP server setting. Check whether the network is set up correctly. Check whether the E-mail address is entered correctly. Check the spam mail setting for the entered E-mail address. (If the spam mail is set, some mails may automatically be deleted or classified into spam mail box etc.) ...
ANUAL 5-2. Check before requesting for service ① List of recommended USB memory Classification Manufacturer Model name Capacity ELECOM MF-BU201GWH BUFFALO RUF2-E1GL-BL Cruzer Micro Scandisk Cruzer Micro U3 8/16GB USM1GJX SONY USM8GH PRINCETON PFU-STS1G DATA TB-ST1GB I-O FM Semiconductor MLC gold SUM-M4GPV SAMSUNG SUM-LWW...
Page 72
ANUAL ② List of supported PTZ camera Protocol Manufacturer Pan/Tilt Zoom Focus Iris Preset Tour LG Multix_E ○ ○ ○ LG Multix ○ ○ ○ ○ ○ ○ LPT-A100L ○ LVC-C100/200HM/LG ○ ○ ○ Electric Inc HSDN251 / Honeywell Co., Honeywell ○...
ANUAL 5-3. Initial setting list for factory default. 1 Step 2 Step 3Step 4Step INPUT Default Video Type 720H/960H 720H XGA(1024x76 8),1080P(192 0x1080),720p( XGA(1024x768) Resolution 1280x720),SX GA(1280x102 Auto- switching 5 ~ 30sec 10 sec interval Overview Button buzzer On/Off Language...
Page 74
ANUAL F / W File Not existed Update Import On/Off SET UPDATE Export On/Off Refresh Check system log Uncheck Uncheck Check settings Uncheck Uncheck recorded Check Initialization Uncheck data Uncheck Factory Check Uncheck default Uncheck Rebuild Check Uncheck Database Uncheck Camera Camera name CH01...
Page 76
ANUAL 1~4/1~8/ Camera 1~16 Video loss Channel Alert On/Off System start On/Off Shutdown On/Off Setting On/Off change Event filter Login/Logout On/Off Motion On/Off detection Video loss On/Off Dynamic IP Dynamic IP Configuration Static IP IP address Subnet mask Gateway TCP / IP MAC address Web port RTSP port...
Page 77
ANUAL Interval Mode OFF/ON CMS address 192.168.0.2 Port 9100 Mode On/Off SMTP Server Port 25/465 ACCOUNT E-MAIL PASSWORD SENDER RECEIVER E-MAIL TEST admin admin anonymous anonymous User1 user1 User list User2 user2 User3 user3 USER ID User4 Password Check Setup Uncheck Uncheck Manual...
OPERATING SYSTEM Embedded Linux COMPRESSION H.264 HARDWARE CODEC MULTIPLEX FUNCTION Live, Record, Backup and Network at the same time RECORDING RESOLUTION 960H, D1, Half D1, CIF 120fps(NTSC), 100fps(PAL) 240fps(NTSC), 200fps(PAL) 480fps(NTSC), 400fps(PAL) RECORDING SPEED at 960H at 960H at 960H...