Eyemax HD4K-1.0(A01) User Manual page 72

3. Press [+/-] button to select "SEARCH MODE "(Event Source /Motion Area).
By selecting Search Mode, TIME SEARCH CHART displays different outcomes.
<Note> EVENT RECORD is set by default and makes the TIME SEARCH
CHART display EVENT recording in Red as above FIGURE 1.
2.4 Event Source Search
Event source search feature allows you to search the recording data for ALARM,
MOTION and VLOSS events previously triggered on the NVR.
1. Press [+/-] button to select "Event Source" in search mode.
And select the event source (Alarm, Motion, Vloss) which you want to search.
1) ALARM: Select Alarm Input 1~4.
2) MOTION: Select the channel 1~16.
3) VLOSS (Video Loss): Select the channel 1~16.
4) SYSTEM: Inactivated
2. Users can have multiple selections by pressing icon, as shown below.
81