Multi-Screen Display And Sequencing; Screen Display; Multi-Screen Display And Switch Sequencing Display - Eyemax HD4K-1.0(A01) User Manual

Table of Contents

2. Multi-screen Display and Sequencing

Select any camera for Full screen display by pressing the Number button of the

desired camera. for 12ch, press 1 then 2.

1) Press [DISPLAY] buttons to activate the multiscreen display. It is changed the

order as shown below among your choice of SPLIT MODE.

2) To start Auto Sequence, press [DISPLAY] buttons for 2 seconds to begin full

screen sequencing.

Click this ICON

you will see following virtual controller

Main Monitor

Spot Monitor

SPLIT MODE

3) The Auto sequence mode and dwell times are programmable in Switch set up.

For detailed information about configuring those, see "Switch Setup". If the

sequence mode is not activated, it moves to Quad mode instead of Sequencing.

4) The Split mode is programmable in General set up.

by Mouse and spot out button on the remote control,

Auto Sequence Status

Auto Sequence

Table of Contents