Hard Disk Usage; I-Phone; Device - Eyemax DVS-9030 Manual

Hard Disk Usage

I-Phone

Accept Automatically:
To accept counter part's IP-phone connection without checking a confirmation message.
38
[ EyeMax ]
Hard Disk Usage is to select data storage method.
If "Once" is selected, data will be stored up to the
point where HDD reaches its maximum capacity.
If "Recycle" is selected, data will be overwritten
from the point HDD reaches its maximum capacity
based on "First In First Out".
I-phone is "Two-Way Audio Communication".
Check the box, go to Control Screen,
and click on the I-phone button for audio
communication. For more detailed
I-phone setup, refer to Appendix 2.
Port No.:
A port number for I-phone use has to be set
up. Normally the default value is good to
use.
Timeout:
It indicates the maximum length of
connection trial. If there is no response within
the value set, call will be cancelled.
Maintenance Log
It is used to record and view maintenance history.

(2) Device

Device sub-screen is divided into 5 different setup categories;
Camera, Output, Input, Audio and Alert.
All devices in each category can be set up on one same page.
Modify Framerate
itself:
By ticking it, DVR
software will
automatically
allocate proper
frames to channels.
39
User's Manual ( 5.1.0.0 )