Table of Contents
Advertisement
4. Log List Search
The logs can be used to search, and to review, any point in time of the recorded data.
Alarm, Motion, Video Loss and system related logs can be searched and played back directly
from the time of the incident.
１.
To start an Event Search, press the
Log List Menu pops up, as shown below.
MENU TAB
ALL
SYSTEM
NETWORK
EVENT
VIDEO LOSS
2. Use the Up/Down buttons [] to the desired "Time" to playback. Use the Left/Right
buttons [] to move to the NEXT page.
3. Press the [OK] button to start playback.
<Note> 1) Log list is saved on HDD.
2) For more detailed information press
A list of all events since the initial NVR power on procedure.
Shows the System List.
Shows the NETWORK List.
Shows the Events List.
Shows Video Loss List.
[Log] button on the IR Remote and the
CONDITION
84
Advertisement
Table of Contents
