1. Manuals
  2. Brands
  3. Eyemax Manuals
  4. DVR
  5. THR04
  6. User manual

Eyemax THR04 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
U
'
M
SER
S
ANUAL
Secure Your Life
DIGITAL VIDEO RECORDER
USER MANUAL
User's Manual
Model: THR04/08
Please read the safety precaution before using the product.
H.264 R
T
DVR
EAL
IME
0

Advertisement

Table of Contents
loading

Related Manuals for Eyemax THR04

Summary of Contents for Eyemax THR04

  • Page 1 ’ ANUAL Secure Your Life DIGITAL VIDEO RECORDER USER MANUAL User’s Manual Model: THR04/08 Please read the safety precaution before using the product. H.264 R...
  • Page 2 ’ ANUAL Safety Precautions   Turn off the power of the product before Because the cable connected to this device installing the product. Do not plug many can be damaged, keep at least 15cm of plugs into one outlet clearance between where the product is installed and where the power outlet is.
  • Page 3 ’ ANUAL CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Two Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage”...
  • Page 4 ’ ANUAL Caution Please read the following precautions carefully before installing the product and follow the directions for installation.  Do not install the product where the level of humidity, dust or smoke is high.  Do no install the product where it is exposed to direct sunlight or close to the heating device. ...

  • Page 5: Table Of Contents

    ’ ANUAL TABLE OF CONTENTS CHAPTER 1 INSTALLATION 1-1 Product characteristics ------------------------------------------------------------ 7 1-2 Contents ---------------------------------------------------------------------------- 8 1-3 Front Panel ------------------------------------------------------------------------- 8 1-4 Rear Panel -------------------------------------------------------------------------- 9 1-5 Connection and initial settings-------------------------------------------------- 10 1-6 RS-485 connection --------------------------------------------------------------- 11 1-7 Control port (Output) connection ---------------------------------------------- 11 1-8 Internal hard disk installation --------------------------------------------------- 12 CHAPTER 2 MAIN SYSTEM APPLICATION 2-1 Operation -------------------------------------------------------------------------- 17...
  • Page 6 ’ ANUAL CHAPTER 3 WEB VIEWER 3-1 Installation ------------------------------------------------------------------------ 53 1. Web viewer installation ................54 3-2 Functional description ----------------------------------------------------------- 55 1. Web viewer monitoring window ..............55 2. Web viewer search window..............56 3. Search menu ................... 57 4. Saving as AVI file ................... 58 CHAPTER 4 SMART PHONE APPLICATION-iSmart Viewer 4-1 Operation guide ------------------------------------------------------------------ 62 CHAPTER 5 APPENDIX...
  • Page 7 ’ ANUAL 1-1 Product characteristics ------------------------------------------------------------ 7 1-2 Contents ---------------------------------------------------------------------------- 8 1-3 Front Panel ------------------------------------------------------------------------- 8 1-4 Rear Panel -------------------------------------------------------------------------- 9 1-5 Remote Controller ---------------------------------------------------------------- 10 1-6 Connection and initial setting --------------------------------------------------- 11 1-7 RS-485 connection --------------------------------------------------------------- 11 1-8 Control port (Output) connection ---------------------------------------------- 12 1-9 Sensor (Input) connection ------------------------------------------------------- 12 1-10 Internal hard disk installation ------------------------------------------------- 13 H.264 R...

  • Page 8: Product Characteristics

    ’ ANUAL 1-1. Product characteristics  Adopted the stable Embedded Linux  Stable file system recovery even after power supply is disconnected from a power outage.  Realized small file size and high video quality by applying the H.264.  Supports terra byte hard disk ( up to 2TB ) ...

  • Page 9: Contents

    ’ ANUAL 1-2. Contents Software Installation CD User’s Manual Screws Mouse SATA cable HDD power cable Power cable Adapter Reference: The type of components can be applied differently by the option. 1-3. Front Panel ① Network LED : Turn on when network is connected. ②...

  • Page 10: Rear Panel

    ’ ANUAL 1-4. Rear Panel ① Camera video input – Connect cameras. ② Main output port – Connect BNC type monitor. (It outputs the same video as MAIN output.) ③ Audio input port – Connect audio input port of external device. ④...

  • Page 11: Connection And Initial Settings

    ’ ANUAL 1-5. Connection and initial setting Caution  The camera or other external devices can be connected to this device in numerous methods. Refer to the user manual of the camera or other external device for addition information on connection methods. ...

  • Page 12: Rs-485 Connection

    ’ ANUAL 1-6. RS-485 connection ① This device has 1 data port (RS-485). ② Use this port to connect the PTZ camera. ③ PTZ camera Connect the PTZ serial communication cable to the RS-485 port. When connecting the cable, make sure that the TX- of the device is connected to the RX- (TX-) of the camera(keyboard), and TX+ of the device is connected to the RX+(TX+) of the PTZ camera(keyboard).

  • Page 13: Internal Hard Disk Installation

    ’ ANUAL 1-8. Internal hard disk installation The hard disk installed inside the device is a precision device which can be damaged even with the small impact. To prevent the hard disk from being damaged, manage the device as follows. To prevent the data loss, it is recommended to back up any important data into an external storage device.
  • Page 14 ’ ANUAL Hard disk installation of replacement A. Hard disk installation After turning on the power of the device, unplug the power from the outlet. ① Loosen the screw on the left, right and rear side of the product. ② Separate the cover of the main unit. ③...
  • Page 15 ’ ANUAL ⑦ Tighten the screws with HDD and main unit. ⑧ Close the top cover and assemble with screw. B. Hard disk replacement First turn of the power of the device and then unplug the power. ① Loosen the screw on the left, right and rear side of the product. ②...
  • Page 16 ’ ANUAL C. Recommended list of hard disk - Hard disks of below are the ones proved to be compatible through experiment. - Please refer to when adding or replacing the hard disk. Manufacturer Model name Capacity ST3250312CS 250GB ST3500312CS 500GB ST500DM002 Seagate...
  • Page 17 ’ ANUAL 2-1 Operation -------------------------------------------------------------------------- 17 Start up ..................17 Shutdown ..................18 2-2 Live Display ----------------------------------------------------------------------- 19 2-3 System setting -------------------------------------------------------------------- 23 System ..................23 Video/Audio ................. 28 Event ..................33 Network ..................37 User ................... 41 2-4 PTZ Control ----------------------------------------------------------------------- 44 2-5 Search (playback) &...

  • Page 18: Operation

    ’ ANUAL 2-1. Operation 1) Start up Turn on this device, then it boots with power indicator light turned on. Pressing button, then the login window would be displayed. Select user and press “OK” button to continue. ⑨ ① [USER] ...

  • Page 19: Shutdown

    ’ ANUAL 2) Shutdown While the status is logged in, Press button, then logout window will be displayed as below. A. SELECTION: Select the Log Out or EXIT. B. USER: Display current user has logged.(admin /user1/user2/user3) C. PASSWORD: Input password. Click “OK”...

  • Page 20: Live Display

    ’ ANUAL 2-2. Live Display ① [Camera name]  Shows camera name  If you want to modify camera name, you can do so by selecting [Setup]  [Camera]  [Channel] ② [Status icon] (OSD)  Status icon shows current status of camera/recording. ...
  • Page 21 ’ ANUAL ③ [Channel selection]  Selected channel shows red rectangle on the edge of the screen.  Press “OK” button on the remote controller to enlarge selected channel. ④ [Live view]  It shows current live view as real time. ⑤...
  • Page 22 ’ ANUAL 7) [System Log]  This shows the system log in DVR.  Click button to show the system log list.  You can see the log of previous date or next date by using buttons.  You can see the previous or next log list by using button.
  • Page 23 ’ ANUAL 11) [System control toolbar – Search screen] 1) [Playback date/time]  It shows the date/time currently playback. 2) [Live screen]  Click button to enter live screen. 3) [Search screen]  Click button to enter search screen.  Refer to Chapter “2-5 Search (playback) &...

  • Page 24: System Setting

    ’ ANUAL 2-3. System Setting System setting can be configured by setup menu. Working condition can be specified by front button / mouse / remote controller. Only admin user can setup system configuration by menu. 1) System ① ② ③ ④...
  • Page 25 ’ ANUAL ② [Date/Time]  Specify date and time of system.  You can specify setting by using ◀ / ▶ button  Select date and time, then you will see virtual keypad as below. A.Date: Specify current date B. Time: Specify current time C.
  • Page 26 ’ ANUAL ③ [F/W Update]  You can run firmware update. A. FILE: You can specify the firmware file to update using ◀ / ▶ buttons. ④ [Setting update] A. IMPORT: You can replace current setting values with new values from USB memory. (OFF/ON) B.
  • Page 27 ’ ANUAL ⑤ [Initialization]  You can initialize data and configuration by this menu. A. System log: Delete all event log. B. Settings: Delete setting of configuration. C. Recorded data: Format HDD data. D. Remove all(Factory default): Delete entire data in the system and restore as factory default ...

  • Page 28: Video/Audio

    ’ ANUAL 2) Video/Audio On the Video/Audio menu, camera, recording, schedule, color, OSD and PTZ can be configured. ① [Camera] ① You can specify channel name and audio for each camera. A. Camera : Select camera to change B. Camera name : Input channel name (Max 8 digits) C.
  • Page 29 ’ ANUAL ② [Recording]  You can specify recording configuration. A. Total frame: Max frame rate has restricted by screen resolution. B. Camera: Select camera to set frame and quality. C. Resolution: Specify screen resolution. (CIF / HALF D1 / D1 ) D.
  • Page 30 ’ ANUAL ③ [Schedule]  You can specify recording method by schedule with date and time. A. Click time table to change recoding method. B. Click channel number to change recording method for all time. C. Click time label to change recording method for all channel. D.
  • Page 31 ’ ANUAL ④ [Color]  You can adjust brightness, contrast, saturation and hue. ⑤ [PTZ]  This is to setup the PTZ configuration. A. CAMERA: select camera to setup PTZ. B. DEVICE NAME : Select camera name.(Max 15 cameras are supported) DSC230 / Sony Co.,Ltd HSDN251 / Honeywell Co.,Ltd LPT - A100L / LG Co.,Ltd...
  • Page 32 ’ ANUAL 15. TPD7720 / DYNACOLOR,INC 16. V1305R-DC / V1300RB / CRX – 1013 / VICON C. DEVICE ID: Select ID that configured in camera. D. BPS: Bit rate Per Second for data transmission. Default value of BPS is ‘9600’ ※...

  • Page 33: Event

    ’ ANUAL 3) Event You can specify the processing when event occurs like sensor, motion detection, video loss, and the event filter settings when event occurs. ① [Device]  You can specify the processing when event occurs from input device. A.
  • Page 34 ’ ANUAL A. Sensor: Selecting sensor number. ( 1 ~ 4 ) B. Channel: Selecting associated channel with the sensor input. C. Type: Setting NO / NC type. (Normal Open): The type of input device is opened normally. (Normal Close): The type of output device is closed normally. D.
  • Page 35 ’ ANUAL Select all: Selecting entire area. Unselect all: Unselecting entire area. Save: Saving selected area as a motion detection zone. Exit: Exiting motion zone setting. D. SENSITIVITY: Setting the motion sensitivity. (High/Normal/Low) E. ALARM: Setting alarm out when motion is detected. F.
  • Page 36 ’ ANUAL ⑤ [Event filter]  Specifying the event which will be sent to the central monitoring center and E-mail. A. System start: Enabling or disabling the system start event. B. Shutdown: Enabling or disabling the system shutdown event. C. Setting change: Enabling or disabling the setting change event. D.

  • Page 37: Network

    ’ ANUAL 4) Network You can set the network environments. ① [TCP/IP]  You can specify the TCP/IP setting according to network environment.  Specifying the TCP port number of Web, Playback and Live. Default values: Web(80), Playback(9091), Live(9092) For dynamic IP ...
  • Page 38 ’ ANUAL ② [Streaming]  You can set each item about the network video streaming. A. Total frame: : Total frame rate set / Maximum available frame rate B. Camera: Selecting camera. C. Frame: Frame rate per a second for each camera D.
  • Page 39 ’ ANUAL ③ [DDNS]  You can use DDNS service : Recommend to use www.dvrname.net.  You can connect to DVR easily using host name instead of IP address with DDNS (Refer to www.dyndns.org in case of using dyndns) A. Mode: Enabling or disabling DDNS. B.
  • Page 40 ’ ANUAL ④ [CMS]  Specifying IP address and TCP port number of CMS. A. MODE: Enabling or disabling event report to the central monitoring center when event occurs. B. IP ADDRESS: The IP address of the central monitoring center. C.
  • Page 41 ’ ANUAL A. Mode: Enabling or disabling E-mail notification. (OFF / Authentication / Not authentication) B. Smtp server: Setting the IP address or domain name of SMTP server. C. Port: Setting the TCP port number of SMTP (Default value is 25). D.

  • Page 42: User

    ’ ANUAL 5) User You can create new user, modify authority, delete user. ① [User list]  You can view the list of all users. ② [Create user] A. Total: It displays the number of registered users and the maximum number of users can be registered.
  • Page 43 ’ ANUAL D. Authority items: Specify each authority item for the user id. Setup Manual alarm Search Backup Network Multi login Audio E. Cameras: Specify the cameras which the user can see. F. Auto Logout: Turn on/off Auto logout from local and network(Off / 5 Min / 10 Min / 30 Min / 60 Min) ③...
  • Page 44 ’ ANUAL Audio E. Cameras: Specify the cameras which the user can see. F. Auto Logout: Turn on/off Auto logout from local and network(Off / 5 Min / 10 Min / 30 Min / 60 Min) ④ [Delete user] ① Select user id to delete. H.264 R...

  • Page 45: Ptz Control

    ’ ANUAL 2-4. PTZ control  It is used to control PTZ camera which is connected at RS-485 port. Settings of camera and DVR should be done if you are to control PTZ camera. 1. Click the icon to control PTZ. 2.
  • Page 46 ’ ANUAL  Setting a new preset position Move camera position using direction button ⑤. Select the preset number to set using button ⑨. Click button ⑪ “SET”. Repeat process 1 ~ 3 stage to set another preset position. ※ Preset numbers are available up to 10. ※...

  • Page 47: Search (Playback) & Backup

    ’ ANUAL 2-5. Search (playback) & backup Various features are available for user to search recorded data easily. 1) Time search  You can search recorded data with date and time.  How to search recorded data Click button on main menu bar. Select the date you want to search on the calendar above.

  • Page 48: Event Search

    ’ ANUAL 2) Event Search  You can search recorded data using event occurrence time. A. Click the button on the main menu bar which is located in the lower position of search mode screen. B. Use buttons on the upper right side to select camera to search. C.

  • Page 49: Backup

    ’ ANUAL 3) Backup  You can back up the recorded data which you select date/time and channels. Click mouse on the icon of the menu bar which is located in the lower position of the screen. Select a device to backup data will be stored. Select media type.
  • Page 50 ’ ANUAL The message “BACKUP STOP” will be shown when backup is finished. How to cancel backup  If you press button when backup is running, the selection message will be shown as below.  Click “OK” button to cancel backup. Erase Media ...
  • Page 51 ’ ANUAL  You can backup automatically daily based by schedule backup. If you are to use schedule backup, set “Use schedule” to “ON”. Enter the time to execute backup at “Backup time”. If USB memory stick is not connected or has no free space, backup cannot be executed.

  • Page 52: Hdd Defect Test

    ’ ANUAL 2-6. HDD defect test  In case HDD is defected, following message displayed to report to the user. A. Test period. - When DVR start up after installing new HDD(Each HDD test takes around 2min 30seconds). - When DVR reboot abnormally 5times(Each HDD test takes around 2min 30seconds). - Every 6hours after start up DVR(Each HDD test takes 1~2seconds).
  • Page 53 ’ ANUAL 3-1 Installation ----------------------------------------------------------------------- 53 1. Web viewer installation ............53 3-2 Functional description ----------------------------------------------------------- 55 1. Web viewer monitoring window ..........55 2. Web viewer search window ............56 3. Search menu ................ 57 4. Saving as AVI file dialog box ............. 58 H.264 R...

  • Page 54: Installation

    ’ ANUAL 3-1. Installation  Set up the network before the installation. 1. Web viewer installation ① Enter the DVR IP address in the Web address window, and then the following Active X installation window will be displayed. ② When you click on the Active X install button, the following window will be displayed. Press the Install button.

  • Page 55: Web Viewer Installation

    ’ ANUAL ③ Press the Next button from the Web View installation window. When the installation is completed, the Web initialization screen will be displayed. (General installation recommended) ④ Enter the ID and password. (Multi-login is not enabled and you must log in to the DVR with an unused ID.

  • Page 56: Functional Description

    ’ ANUAL 3-2. Functional description 1. Web viewer monitoring window ③ ② ④ ⑤ ⑥ ⑨ ⑦ ⑧ ⑪ ⑩ ⑫ ① ⑬ ⑭ ① Divide screen division (Full screen/1/4) ② Selecting a camera ③ Real time image capture (Save as JPEG) ④...

  • Page 57: Web Viewer Search Window

    ’ ANUAL 2. Web viewer search window ③ ④ ⑤ ⑧ ⑦ ⑥ ⑩ ⑨ ⑪ ② ① ⑫ ① Divide screen division (Full screen/1/4) ② Selecting a camera ③ Saving video or still image (Saving as AVI/JPEG/BMP) ④ Date/Time selection button to play back (Refer to 3. Search dialog box) ⑤...

  • Page 58: Search Menu

    ’ ANUAL 3. Search Menu ① ② ③ ⑤ ④ ⑥ ⑧ ⑦ ① Recorded data graph (Click on the data graph to select time to play.) ② Time scroll bar ③ Zoon in/out of graph (It can be scaled from 2 hours to 24 hours by minute unit.) ④...

  • Page 59: Saving As Avi File

    ’ ANUAL 4. Saving as AVI file ① ② ④ ③ ⑤ ⑥ ⑧ ⑦ ⑨ ⑩ ① Camera name/Date/Time which is currently displayed. ② Starting AVI saving (File name is requested when you click on this button.) ③ Stopping AVI saving ④...
  • Page 60 ’ ANUAL -Smart Viewer 4-1 Functional description -------------------------------------------------------60 H.264 R...
  • Page 61 ’ ANUAL 4-1. Functional description 4-1 Software Installation How to install i-Smart Viewer APP through iTunes and Android market. 1) On the PC web browser, Visit http://itunes.apple.com/app/i-smart-viewer/id399765847?mt=8 Visit https://market.android.com/details?id=com.livezen.iSmartView&feature=search_result 2) You will see below web page and click « View in iTunes » 3) Click “Free APP”...
  • Page 62 ’ ANUAL 4) Sync iTunes and your iPhone / iPod to install Application to your iPhone / iPod. 5) You will see i-Smart icon in the iPhone / iPod. How to install i-Smart Viewer APP on the iPhone / iPod APP Store 1) On the iPhone / iPod, run APP Store Application.

  • Page 63: Operation Guide

    ’ ANUAL e View / Toolbar 4. Liv Move Back to DVR List Shows Shows Camera name registered DVR name Display Live Screen - Drag screen to move channel. (Drag to left: move to next channel) (Drag to right: move to previous channel) Control Bar - If PTZ camera is connected, PTZ icon and control icon will be enabled.
  • Page 64 ’ ANUAL 5. Screen Division mode (1 / 4) Touch icon to select screen division (Switch screen division mode to 4 CH mode) Camera Information 4 Channel mode - Drag screen to Left / Right : move to next / previous 4 cameras - Touch channel to enlarge selected channel as 1 camera mode.
  • Page 65 ’ ANUAL 7. Preset / Tour Control Select Preset / Tour mode When preset or tour is set on the DVR, this icon will be activated. Camera Information - Change channel by drag or touch arrow button. - Touch channel name to move selected channel. 8.
  • Page 66 ’ ANUAL 9. Album Tab Album Tab is to see saved still image by snapshot function. Search Image by file name Saved file list (Shows DVR name, camera number, YY/MM/DD Hour:Min:Sec) Switch to List mode / Thumb Nail mode [List mode] [Thumb Nail mode] 10.
  • Page 67 ’ ANUAL 11. Edit Tab Edit Tab is to edit DVR access information. Search DVR From list Select DVR to edit Touch OK to save Modified information H.264 R...
  • Page 68 ’ ANUAL 5-1 Check before requesting for service ------------------------------------------ 68 5-2 Recommended device to use --------------------------------------------------- 71 5-3 Initial setting list for factory default ------------------------------------------- 73 5-4 Product specification ------------------------------------------------------------- 79 H.264 R...

  • Page 69: Check Before Requesting For Service

    ’ ANUAL 5-1. Check before requesting for service Check before requesting for service. If the following symptoms are observed when using the product, recheck the following. It may not be a problem. Symptom Checkpoint and resolution Check whether the power plug is correctly plugged. I cannot turn on the power of Check whether the voltage of the power supply is correct.
  • Page 70 ’ ANUAL Symptom Checkpoint and resolution Check whether the recording audio channel is correctly set up. I cannot hear the audio recorded Check whether the connecter on the rear side of the device is connected with the video. with external device (Line input) correctly. Check whether the connected external device is operating correctly.
  • Page 71 ’ ANUAL Symptom Checkpoint and resolution When the E-mail transmission fails without SMTP server setting.  Check whether the network is set up correctly.  Check whether the E-mail address is entered correctly.  Check the spam mail setting for the entered E-mail address. (If the spam mail is set, some mails may automatically be deleted or classified into spam mail box etc.) ...

  • Page 72: Recommended Device To Use

    ’ ANUAL 5-2. Check before requesting for service ① List of recommended USB memory Classification Manufacturer Model name Capacity ELECOM MF-BU201GWH BUFFALO RUF2-E1GL-BL Cruzer Micro Scandisk Cruzer Micro U3 8/16GB USM1GJX SONY USM8GH PRINCETON PFU-STS1G DATA TB-ST1GB I-O FM Semiconductor MLC gold SUM-M4GPV SAMSUNG...
  • Page 73 ’ ANUAL ② List of supported PTZ camera Protocol Manufacturer Pan/Tilt Zoom Focus Iris Preset Tour ○ ○ ○ LG Multix_E ○ ○ ○ ○ ○ ○ LG Multix ○ LPT-A100L LVC-C100/200HM/LG ○ ○ ○ Electric Inc HSDN251 / Honeywell Co., ○...

  • Page 74: Initial Setting List For Factory Default

    ’ ANUAL 5-3. Initial setting list for factory default. 1 Step 2 Step 3Step 4Step INPUT Default Auto- switching 1~30sec 10sec interval Main Output On / Off Button buzzer On/Off Overwrite On / Off Use data On / Off retain Retain day 1 ~ 90 Days 30 Days...
  • Page 75 ’ ANUAL Export On/Off Refresh system log Unselected settings Unselected recorded Unselected data Initialization Factory Unselected default Rebuild Unselected Database Camera Camera name CH01 NOT USED / Camera Audio 1 NOT USED Camera 1~4 NOT USED / Audio 2 NOT USED Camera 1~4 Camera CIF/...
  • Page 76 ’ ANUAL New Born WVCS850 PELCO-D PELCO-P SCC-641 SPD-2300 SUNGJIN TPD7720 V1305R-DC Device id 1200/2400/4 800/9600/19 Baud rate 9600 200/38400/5 7600/115200 5 Sec 10 Sec 20 Sec Touring 30 Sec 1 Min interval 1 Min 3 Min 5 Min Alarm Off/1~10sec 10sec duration...
  • Page 77 ’ ANUAL Channel Alarm On/Off Alert On/Off System start On/Off Shutdown On/Off Setting On/Off change Login/Logout On/Off Event filter Sensor On/Off detection Motion On/Off detection Video loss On/Off Alarm output On/Off Dynamic IP Dynamic IP Configuration Static IP IP address Subnet mask Gateway TCP / IP...
  • Page 78 ’ ANUAL SMTP Server Port ACCOUNT PASSWORD SENDER RECEIVER E-MAIL TEST admin admin guest anonymous User1 user1 User list User2 user2 User3 user3 User User4 Password MANUAL Selected ALARM SEARCH Selected BACKUP Selected NETWORK Selected User Create user MULTI Authority LOGIN Selected AUDIO...
  • Page 79 ’ ANUAL user1 Delete user user2 user3 H.264 R...

  • Page 80: Product Specification

    ’ ANUAL 5-4. Product Specification MODEL THR04 THR08 OPERATING SYSTEM Embedded Linux COMPRESSION H.264 HARDWARE CODEC MULTIPLEX FUNCTION Live, Record, Backup and Network at the same time RECORDING RESOLUTION 960H, D1, Half D1, CIF 120fps(NTSC), 100fps(PAL) 240fps(NTSC), 200fps(PAL) RECORDING SPEED...

This manual is also suitable for:

Thr08

Table of Contents