Table of Contents
Advertisement
IV. OPERATION
If you want simple play from the beginning, then
choose CF-card FIRST DISPLAY by (▶ , ◀)
button then press PLAY (▶ ||) button.
Once you have located an arrow mark at the
mode (CF-card FIRST DISPLAY), press PLAY(▶
||) button. Now you can see 8 different screens:
the first 4 pictures are Live image screens( screen
L1, L2, L3 and L4) and the last 4 pictures are
previously recorded image screens( screen P1,
P2, P3 and P4). And on top of the screen you can
observe time being changed accordingly to the
recorded time.
3) DISPLAY MODE
& LIST BUTTON
This button enables users to change different screen settings such as Quad(4 screens)
and full screen. For instance, when your screen shows 4 channels of different screen,
Then press this button (
MODE button) to change different screen. Factory setting is
AUTO mode,
AUTO mode: Showing each camera channel one by one with Full screen. Also, can
change time rate with up / down button 1 to 99 second.
QUAD
AUTO
FULL
(each channel)
When you press List Button, it will be showed all list for
alarm and motion detection time and date.
M in circle mean motion detection list and A in circle
mean alarm detection list. This list shows up to 990
events.
Use ▲, ▼ button and move curser then press Play (▶
||) button. It will be play as soon as.
8
QUAD
IV. OPERATION
4) MENU (LOCK) Select button & ( ▲
When you press Menu button, you can see " SETUP
MENU " with 5 different options. You can adjust the
setting by pressing MENU button.
when you go in to one certain mode,
navigate each mode by pressing "MENU" button. but
if the arrow make is on the EXIT and you will go out
from this mode.
In play mode, 4 arrow buttons are changed to different
functions. ► ► ( ►) button is fast forward option which is
playing speed to X1, X2, X4, X8 and X16 for each time pressing the button, and ◄ ◄ (◄) fast
backward option which is same as fast forward option but it will be played to back. ı► and
◄I are back to normal speed from fast options.
When you press and hold this Menu button 3 second, it will be showed Lock icon on the
screen and locked all key buttons which mean any buttons not working if you press any
buttons. However, press and hold 3 second one more time, it will be unlocked all key
buttons.
4-2 REAR PANEL
1. CAMERA INPUT
Connect DVR to cameras(s). Each channel port indicates a single camera
connection. It has total 4 camera RCA connection ports. (C1 to C4)
2. VIDEO OUT
Use this port to connect DVR to the monitor. (V-Out)
3. AUDIO IN AND OUT
Use these port to connect DVR to the microphone and speaker.
Connect "AUDIO IN" for microphone and "AUDIO OUT" for a speaker connection.
4. ALARM IN AND GROUND
This is a alarm input terminal. You need to install a single alarm sensor device.
5. POWER
Free volt for 12 volt or 35 volt detect with automation. Approximately, this DVR use
less than 1A.
▼
◄
► ) Button
,
,
,
you can
9
Advertisement
Table of Contents
